Ballistol for Window & Glazing Fitters

A lot of window service work is hinges, locks and seals rather than glass. Universal Oil eases uPVC window and door mechanisms, Silicone Oil keeps the rubber gaskets supple, and PTFE Spray suits patio and bifold door runners. At handover, Cold Degreaser lifts stickers and glue from new glass and Glass Cleaner leaves it streak-free.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Mechanisms that operate freely

Universal Oil creeps into hinges, stays and lock mechanisms and does not go sticky.

Gaskets kept supple

Silicone Oil keeps rubber gaskets from drying out, cracking or sticking.

Runners with a dry film

PTFE Spray lubricates patio and bifold runners without a wet film that holds grit.

Clean glass at handover

Cold Degreaser lifts stickers and glue, and Glass Cleaner leaves a streak-free finish.

Application

  • Ballistol Universal Oil

    Wipe dirt out of the hinge or keep, give each moving point two or three short bursts, open and close the window a few times and wipe off the excess.

  • Silicone Oil Spray, 65ml

    Wipe the gasket clean, apply a thin coat with a cloth and buff off the excess. Keep it off the glass.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean dirt and old lubricant out of the runner and let it dry. Spray a thin, even coat from 15 to 20cm and leave it a few minutes before sliding the door.

  • Cold Degreaser 200ml

    Peel the sticker, spray the glue left behind and wipe clean.

  • Glass Cleaner

    Spray onto the glass and wipe with a microfibre cloth before it dries, avoiding runs.

Areas

Windows

Hinges, friction stays, handles and gaskets.

Doors

Multipoint locks, hinges and rubber seals.

Patio and bifold doors

Runners, tracks and rollers.

Handover

New glass that needs stickers, glue and fingerprints removed.

Uses

  • Easing stiff uPVC window hinges, friction stays and locking mechanisms
  • Lubricating multipoint locks on uPVC and composite doors
  • Keeping rubber gaskets on windows and doors supple
  • Lubricating patio and bifold door runners
  • Removing stickers and glue from new glass
  • Leaving glass streak-free at handover

Ordering in volume

Firms usually order for fitting teams and service vans together, then reorder as the service side works through it. Larger installers often order before the spring rush.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.