Ballistol for Solar & Battery Installers

Solar and battery installers spend their days on roofs, in lofts and in garages, carrying drills, rail-cutting kit and fixings. Universal Oil keeps rust off tools and frees seized bolts when old systems come off. Cold Degreaser cleans grease and old labels off casings before new labelling, and PTFE Spray suits ladder clamps, roof rack locks and van racking.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Tools protected on the roof

A thin film of Universal Oil keeps damp off drills, bits and cutters.

Old fixings freed

Its low surface tension lets it creep into rusted threads.

Clean casings for labels

Cold Degreaser lifts grease and sticker glue from metal and plastic.

Dry film for van kit

PTFE Spray suits ladder clamps and racking runners without holding road grit.

Application

  • Ballistol Universal Oil

    Give a seized bolt two or three short bursts and leave it at least 15 minutes. Before tools go back in the van, wipe them over with a light coat and wipe off the excess.

  • Cold Degreaser 200ml

    Spray an even coat onto the outside of the casing and wipe off grease and sticker glue before the new labels go on.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the clamp or runner, shake the can and spray a thin coat from 15 to 20cm. Leave it a few minutes to dry.

  • Silicone Oil Spray, 65ml

    Wipe the cabinet door seal clean, apply a thin coat with a cloth and buff off the excess.

Areas

Roof work

Drills, bits, cutters and fixings used on the roof.

Strip-outs

Seized bolts on old systems being removed.

Garages and plant rooms

Casings, labels and cabinet door seals.

Vans

Ladder clamps, roof rack locks and racking runners.

Uses

  • Protecting drills, bits and rail-cutting tools from rust
  • Freeing seized bolts and fixings when removing old systems
  • Cleaning grease and sticker glue off casings before labelling
  • Lubricating ladder clamps, roof rack locks and racking runners with dry PTFE
  • Keeping rubber seals on outdoor cabinet doors supple
  • Protecting spare fixings in the van

Ordering in volume

Installers usually buy one kit per van and reorder together for the team. Firms with several crews often order more in spring, when installation work picks up.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.