Ballistol for Garage Door Engineers

Garage door engineers get called out to doors that grind, stick or will not lock. PTFE Spray is the one for hinges and rollers, and it leaves a dry film in the tracks that does not collect grit from the drive. Universal Oil frees seized handles, locks and locking bars, Silicone Oil keeps the rubber bottom seal supple, and Cold Degreaser clears old grease first.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Tracks stay cleaner

The dry PTFE film does not pick up grit blown in from the drive.

Locks that turn again

Universal Oil creeps into seized handles, locks and locking bars.

Bottom seals kept supple

Silicone Oil stops the rubber bottom seal drying out and cracking.

Old grease stripped

Cold Degreaser removes dried and gummed oil before new lubricant goes on.

Application

  • Cold Degreaser 200ml

    Spray the tracks and hinges, wipe out the old grease and grit and let them dry.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Shake the can and spray a thin, even coat on hinges, rollers and cables from 15 to 20cm. Leave it a few minutes before running the door.

  • Ballistol Universal Oil

    Give the lock and handle two or three short bursts, work them a few times and leave them 2 to 5 minutes. Wipe off the excess.

  • Silicone Oil Spray, 65ml

    Wipe the bottom seal clean, apply a thin coat with a cloth and buff off the excess. Keep it off paths and the drive.

Areas

Up-and-over doors

Pivots, hinges, locks and locking bars.

Sectional doors

Hinges, rollers, tracks and cables.

Roller garage doors

Guides, bottom seals and locks.

Workshop and van

Spares, fixings and tools.

Uses

  • Lubricating hinges and rollers on sectional and up-and-over doors
  • Clearing old grease and grit out of tracks before relubricating
  • Freeing seized handles, locks and locking bars
  • Keeping rubber bottom seals and side seals supple
  • Lubricating cables with a dry film

Ordering in volume

Garage door firms usually keep stock on each van and in the workshop, and top up before winter. Installers can add care products to hand to customers at handover.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.