Ballistol for Flour Mills

A flour mill moves grain and flour through roller mills, sifters, elevators and packing machines, and most of it is dusty. Ballistol H1 Food Oil is NSF H1 registered for points where flour contact is possible and reduces wear under heavy load. PTFE Spray leaves a dry film on doors and runners away from product, so dust does not stick to it.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

For heavy, dusty plant

H1 Food Oil lubricates under heavy load and reduces wear.

Stops parts seizing

It has anti-seize properties against galling and seizing.

Dry film where dust settles

PTFE Spray does not pick up dust and grit the way oil does.

Clean product

H1 Food Oil has no smell or taste and will not taint flour.

Application

  • Ballistol H1 Food Oil

    Apply sparingly to roller mill bearings, chains and gears and wipe off the excess.

  • Packing line

    On baggers and packing machines, a small amount of H1 Food Oil on moving parts is enough. Wipe it back so flour does not cling to it.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    On dusty doors and shutters away from product, clean off old lubricant, let the part dry, spray a thin coat from 15 to 20cm and leave it a few minutes.

  • Ballistol Universal Oil

    For yard gates, padlocks and workshop tools only, away from grain and flour. It is not for food contact.

Areas

Mill floor

Roller mills, sifters and drives.

Elevators and conveyors

Chains, bearings and gears.

Packing

Baggers and packing machines.

Intake and yard

Doors, shutters, gates and padlocks, away from product.

Uses

  • Lubricating roller mill bearings and drive chains
  • Lubricating elevator and conveyor chains where flour contact is possible
  • Lubricating bagging and packing machines
  • Stopping steel parts rusting and seizing in damp intake areas
  • Keeping dusty doors and shutters free with a dry PTFE film
  • Freeing yard gates, padlocks and workshop tools, away from grain

Ordering in volume

Mills usually order through engineering stores on a purchase order and repeat it through the year. Tell us how many sites and lines you run and we can quote on that.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.