Ballistol for Robotics & Automation Integrators

Integrators build and commission cells that have to look right and run right on handover day. PTFE Spray lubricates linear guides, slide rails and sliding guard doors with a dry film that does not attract dust. Cold Degreaser cleans grease and label glue off frames and panels, and H1 Food Oil suits cells going onto food or packaging lines.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Dry film on guides

PTFE Spray suits slide rails and linear guides and does not attract dust.

Clean handovers

Cold Degreaser lifts grease and sticker glue from metal, plastic and glass.

Ready for food lines

H1 Food Oil is NSF H1 registered and has no smell or taste.

Steelwork protected

A thin film of Universal Oil keeps damp off fixtures and tooling during build.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old lubricant and let the guide dry. Shake the can, spray a thin, even coat from 15 to 20cm and leave it a few minutes before running the axis.

  • Cold Degreaser 200ml

    Spray an even coat over grease or label glue on frames and guards and wipe it off before handover.

  • Ballistol H1 Food Oil

    On food and packaging cells, apply sparingly to moving parts and wipe off the excess.

  • Ballistol Universal Oil

    Wipe off dust, spray a thin coat on bare steel fixtures and wipe off the excess, leaving a light film.

  • Silicone Oil Spray, 65ml

    Wipe the seal clean, apply a thin coat with a cloth and buff off the excess.

Areas

Build shop

Frames, fixtures and tooling during assembly.

Cell guarding

Sliding guard doors, catches and rubber seals.

Commissioning

Linear guides and slides being run in.

Food and packaging sites

Cells where incidental food contact is possible.

Uses

  • Lubricating linear guides, slide rails and sliding guard doors with dry PTFE
  • Cleaning grease and label glue off frames and panels before handover
  • Lubricating cells on food and packaging lines with H1 Food Oil
  • Protecting steel fixtures and tooling from rust during build
  • Freeing stiff adjusters and fixings during commissioning
  • Keeping rubber seals on guard doors supple

Ordering in volume

Integrators often order per project, with a kit going out with each commissioning team. Tell us how many installs you have planned and we will quote on that basis.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.