Ballistol for Furniture Manufacturers

Furniture makers cut, shape and finish wood all day, so saw blades and cutters clog with resin and the spray shop needs clean surfaces. Resin Remover softens the resin so it wipes off. PTFE Spray suits drawer runners and sliding mechanisms on finished pieces, and Universal Oil protects machine tables, tools and metal fittings from rust.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clean blades and cutters

Resin Remover softens resin so it wipes off without leaving residue.

Runners that glide

PTFE Spray leaves a dry film on drawer runners that does not pick up dust.

Rust kept off machine tables

A thin film of Universal Oil keeps damp off cast iron and steel.

Clean surfaces for finishing

Cold Degreaser removes oil and grease before painting or varnishing.

Application

  • Resin Remover

    Take the blade off the machine, spray both faces and leave it a few minutes. Wipe the softened resin off with kitchen roll, use a brass brush on the teeth and oil the blade before refitting. Wear protective gloves.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the runner, shake the can and spray a thin, even coat from 15 to 20cm. Leave it a few minutes before the drawer goes back in.

  • Ballistol Universal Oil

    Wipe off dust, spray a thin coat on machine tables and fences at the end of the week and wipe off the excess, leaving a light film.

  • Cold Degreaser 200ml

    Spray an even coat over oily fittings or surfaces and wipe clean before painting or varnishing.

Areas

Machine shop

Saw blades, router cutters, planers and cast iron tables.

Assembly

Clamps, cramps, drawer runners and metal fittings.

Spray shop

Surfaces that need degreasing before finishing.

Despatch

Finished pieces with runners and mechanisms checked before delivery.

Uses

  • Cleaning resin off saw blades, router cutters and planer knives
  • Lubricating drawer runners and sliding mechanisms with dry PTFE
  • Protecting cast iron machine tables from rust
  • Degreasing metal fittings and surfaces before finishing
  • Removing label glue from hardware and glass
  • Freeing stiff sash cramps and bench vices

Ordering in volume

Furniture makers often buy Resin Remover in 5 litres for the machine shop, with PTFE Spray by the case if it goes on runners before despatch. Orders usually follow the production schedule.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.