Ballistol for Aerospace Suppliers

Aerospace machine shops and assembly suppliers work to tight specifications, so Ballistol is mostly used on the tooling, fixtures and equipment around the parts. Universal Oil protects jigs, fixtures and hand tools from rust and fingerprint marks, PTFE Spray lubricates slides and guides with a dry film, and Cold Degreaser cleans oil off surfaces. Check any use on parts against your process specifications.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Tooling kept in condition

A thin film of Universal Oil keeps damp off jigs, fixtures and gauges.

Fingerprints neutralised

It is mildly alkaline, so it neutralises the hand sweat that leaves rust marks.

Dry, clean lubrication

PTFE Spray leaves a dry film that does not attract dust.

Paperwork for approval

Safety data sheets are in our technical data library for supplier approval.

Application

  • Ballistol Universal Oil

    Wipe the fixture or gauge clean, spray a thin coat and leave it a few minutes. Wipe off the excess with a dry cloth so only a light film remains.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off old lubricant and let the slide dry. Shake the can, spray a thin, even coat from 15 to 20cm and leave it a few minutes before use.

  • Cold Degreaser 200ml

    Spray an even coat over oily tooling or equipment and wipe it clean before use.

  • Optics & Lens Cleaner Spray, 30ml

    Spray one or two pumps onto a clean microfibre cloth, never straight onto the lens, wipe from the centre outwards and polish dry.

Areas

Machining

Jigs, fixtures, vices and workholding.

Inspection

Gauges and setting tools kept between checks.

Assembly

Fixture slides, clamps and hand tools.

Tool stores

Cutters, holders and spares in storage.

Uses

  • Protecting jigs, fixtures and gauges from rust between jobs
  • Stopping fingerprint rust on tooling handled during setup
  • Lubricating fixture slides and linear guides with dry PTFE
  • Degreasing tooling and equipment before use
  • Freeing seized clamps and adjusters on fixtures
  • Cleaning safety glasses and inspection camera lenses

Ordering in volume

Suppliers usually order through purchasing on a fixed reorder cycle and often ask for safety data sheets first. These are in our technical data library, and we can quote against your usage.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.