Ballistol for Machine Shops & CNC Subcontractors

A subcontract machine shop has to ship parts that arrive bright, so rust between operations or in despatch costs money. Universal Oil leaves a thin film on machined steel and neutralises the hand sweat that marks parts after handling. PTFE Spray suits machine door runners and fixture slides, and Cold Degreaser cleans parts before inspection or assembly.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Parts leave bright

A thin film of Universal Oil keeps damp off machined steel between operations and in despatch.

Handling marks do not rust

It is mildly alkaline, so it neutralises the hand sweat that leaves rusty fingerprints on bare steel.

Dry film on slides

PTFE Spray suits door runners and fixture slides, and does not pick up dust the way oil does.

Clean parts for inspection

Cold Degreaser removes oil and grease from metal and plastic parts before they are measured or assembled.

Application

  • Ballistol Universal Oil

    Wipe off swarf and grit, then spray or drip a thin coat onto the part. Leave it 2 to 5 minutes and wipe off the excess with a dry cloth, so a thin film stays on the steel.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off old lubricant and let the runner dry. Shake the can, spray a thin, even coat from 15 to 20cm and leave it a few minutes before use.

  • Cold Degreaser 200ml

    Spray an even coat over the oily part and wipe it off. The spray reaches holes and recesses a brush will not get into.

  • Silicone Oil Spray, 65ml

    Wipe door seals and O-rings clean, apply a thin coat with a cloth and buff off the excess. Keep it off the floor, which it makes slippery.

Areas

Machining cells

Chucks, vices, fixtures and the sliding doors on machine enclosures.

Inspection and despatch

Finished parts waiting to be measured, packed or collected.

Stock racking

Bar, plate and offcuts kept in an unheated unit.

Tool crib

Holders, collets and hand tools that need protecting from damp.

Uses

  • Protecting machined parts between operations and before despatch
  • Wiping down chucks, vices and fixtures at the end of a shift
  • Lubricating machine door runners and fixture slides with a dry PTFE film
  • Degreasing parts before inspection, assembly or painting
  • Freeing seized clamps, adjusters and tooling fixings
  • Keeping rust off bar stock and offcuts in the rack

Ordering in volume

Shops with several machines usually buy Universal Oil in 5 litres to decant, plus PTFE Spray and Cold Degreaser for each cell. Most settle into a regular reorder once they know their usage, so tell us roughly what you get through and we will quote on that.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.