Ballistol for Engineering & Manufacturing
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Ballistol Universal Oil
From £4.50 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Cold Degreaser 200ml
£7.45 retail
-
Resin Remover
From £7.35 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
-
Ballistol H1 Food Oil
From £9.99 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Fewer products on the shelf
Universal Oil cleans, lubricates and protects metal, so one can covers many small maintenance jobs.
Dry lubrication where dust collects
PTFE Spray leaves a dry film that does not pick up dust and grit the way oil does.
A food-safe option for mixed sites
H1 Food Oil is NSF H1 registered for machinery where incidental food contact is possible.
Bulk sizes for the shop floor
Universal Oil comes in 5 and 10 litres and Resin Remover in 5 litres, with 500ml bottles and a pump spray nozzle for daily use.
Application
-
Ballistol Universal Oil
Wipe off swarf and dirt, spray a thin coat and work the part. On seized threads leave it at least 15 minutes, or overnight, then wipe off the excess.
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Clean and dry the surface, shake the can and spray a thin, even coat from 15 to 20cm. Let it dry for a few minutes before running the part.
-
Cold Degreaser 200ml
Spray onto oily metal, plastic or glass and wipe off. Use it before painting or assembly, and to lift sticker glue.
-
Resin Remover
Spray resinified blades and cutters, leave a few minutes and wipe clean. Oil the steel afterwards with Universal Oil.
-
Ballistol H1 Food Oil
Apply sparingly to machinery in food areas and wipe off the excess. It is non-staining and suits most plastics and rubber.
Areas
Machine shop
Machined parts, fixtures, chucks and slides between operations and in storage.
Production lines
Guides, linkages, conveyors and guards that stick or squeak.
Maintenance stores
Fasteners, spares and tools that need protecting from rust.
Woodworking and finishing
Saw blades, cutters and surfaces that need cleaning before finishing.
Uses
- Protecting machined parts and stock from rust between operations
- Lubricating slides, guides and linkages with a dry PTFE film that does not pick up dust
- Degreasing parts before painting or assembly
- Freeing seized fasteners and adjusters
- Cleaning resin off saw blades and woodworking machinery
- Caring for rubber seals and O-rings
Sectors in Engineering & Manufacturing
- Machine Shops & CNC SubcontractorsA subcontract machine shop has to ship parts that arrive bright, so rust between operations or in despatch...
- Fabrication & Welding ShopsFabricators work with steel that starts to rust soon after it arrives, and with clamps, jigs and vice...
- ToolmakersPress tools, moulds and jigs take weeks to make and can be marked by one damp weekend. Toolmakers...
- Foundries & ForgesFoundries and forges are hot, dirty places, so the products here are for the cold side of the...
- Sheet Metal WorksSheet metal shops handle thin mild steel that marks and rusts quickly, especially in a cold unit over...
- Steel StockholdersA stockholder's racks hold bright bar, tube and plate that can rust while it waits for an order....
- Injection MouldersMould tools are expensive steel, and a tool put away damp can come back with rust on the...
- Plastics & Rubber ManufacturersExtrusion, calendering and rubber processing lines run on steel dies, rollers and guides that rust when a line...
- Packaging ManufacturersPackaging plants that make cartons, trays and film for food customers need lubricants that will not taint the...
- Printers & Print FinishersPrint rooms and finishing shops run guillotines, folders, binders and presses with plenty of guides, slides and blades....
- Paper & Board MillsPaper and board mills are warm, damp places, and bare steel on guards, frames and spare parts rusts...
- Textile MillsLooms, knitting frames and sewing machines need oil on their moving parts, but a drip on the cloth...
- Furniture ManufacturersFurniture makers cut, shape and finish wood all day, so saw blades and cutters clog with resin and...
- Joinery ManufacturersJoinery shops machine a lot of softwood, and pine resin builds up on cutters and saw blades fast....
- Glass & Ceramics WorksGlassworks and potteries combine hot processes with a lot of ordinary maintenance at the cold end. Cold Degreaser...
- Chemical & Coatings PlantsChemical and coatings plants have a long list of small maintenance jobs around tanks, mixers, drum stores and...
- Aerospace SuppliersAerospace machine shops and assembly suppliers work to tight specifications, so Ballistol is mostly used on the tooling,...
- Automotive Component MakersComponent makers machine, press and assemble parts in volume, and the maintenance team keeps lines, fixtures and tooling...
- Electronics AssemblyElectronics assembly lines keep Ballistol away from the boards and use it on the kit around them. PTFE...
- Hydraulics & Pneumatics EngineersHydraulic and pneumatic engineers rebuild cylinders, pumps and valves, then send them back out to site or into...
- Robotics & Automation IntegratorsHydraulic and pneumatic engineers rebuild cylinders, pumps and valves, then send them back out to site or into...
- Bearing & Power Transmission SuppliersHydraulic and pneumatic engineers rebuild cylinders, pumps and valves, then send them back out to site or into...
- Maintenance ContractorsHydraulic and pneumatic engineers rebuild cylinders, pumps and valves, then send them back out to site or into...
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.









