Ballistol for Trades, Tools & Locksmithing
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Ballistol Universal Oil
From £4.50 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Resin Remover
From £7.35 retail
-
Cold Degreaser 200ml
£7.45 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Gets into tight mechanisms
Universal Oil creeps into locks, cylinders and fine gaps.
Does not gum up
It does not resinify, so locks stay free for longer.
A dry option for locks
PTFE Spray lubricates without a wet film that holds dust.
Clean cutting tools
Resin Remover lifts pitch from saw blades and cutters without scraping.
Application
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Give the keyway a short burst, work the key a few times and let it dry. Reapply when the lock starts to stick.
-
Ballistol Universal Oil
Spray or drip onto tools and mechanisms, leave 2 to 5 minutes, then wipe off the excess. On rusted threads, leave it at least 15 minutes.
-
Resin Remover
Spray the blade or cutter, leave it a few minutes, wipe clean with kitchen roll and oil the steel afterwards.
-
Cold Degreaser 200ml
Spray and wipe to remove oil and grease before painting or varnishing.
Areas
Locks and doors
Cylinders, padlocks, hinges, garage doors and safes.
Workshop
Saw blades, router bits, planer knives, chisels and sharpening kit.
Van and toolbag
Hand and power tools that sit in damp vans between jobs.
On the job
Seized fixings, stiff fittings and surfaces that need degreasing.
Uses
- Lubricating locks, cylinders and padlocks
- Protecting hand and power tools from rust in the van
- Cleaning resin from saw blades, router bits and planer knives
- Oiling knives, chisels and sharpening kit
- Freeing seized fixings and fittings
- Degreasing surfaces before finishing
Sectors in Trades, Tools & Locksmithing
- LocksmithsLocksmiths need a lubricant that reaches deep into a cylinder and does not leave a sticky residue to...
- Key Cutting & Shoe Repair ShopsA key cutting and shoe repair counter deals with metal, leather and small mechanisms in one shop. PTFE...
- Joiners & CarpentersJoiners get resin on saw blades and cutters, rust on chisels and planes, and call-backs for drawers and...
- Plumbers & Heating EngineersPlumbers and heating engineers carry pipe wrenches, cutters and benders that rust in a damp van, and meet...
- BlacksmithsA forge is hard on tools. Tongs, hammers, swages and the anvil face rust quickly once the fire...
- Mobile WeldersMobile welders repair gates, trailers, railings and machinery on site, then leave bare steel that rusts if it...
- Tool ShopsTool shops sell to trades and home users who want one can that frees, lubricates and protects. Universal...
- Knife MakersKnife makers work with carbon steel that rusts from a fingerprint, open-pore wooden handles and leather sheaths. Universal...
- Sharpening ServicesSharpening services take in kitchen knives from restaurants and butchers, scissors from salons, and garden and woodworking tools...
- Kitchen & Bathroom FittersKitchen and bathroom fitters finish every job with a handover, and the small things get noticed. Drawers that...
- ShopfittersShopfitters build counters, displays and storage that have to work from opening day, often in finished spaces where...
- HandymenA handyman's day might include a squeaking door, a sticking drawer, a seized gate bolt and a rusty...
- Sign MakersSign makers fit and remove vinyl, glass manifestations and fixings, and run plotters and routers in the workshop....
- StonemasonsMasons' chisels, claws and points are steel, and the dust and damp of a banker shop rusts them...
- Painters & DecoratorsA good finish starts with a clean surface. Cold Degreaser removes grease, nicotine, soot and sticker glue before...
- TilersTilers work with water, tile dust and abrasive slurry, and their cutters and tools suffer for it. PTFE...
- Garage Door EngineersGarage door engineers get called out to doors that grind, stick or will not lock. PTFE Spray is...
- Chimney SweepsSweeps spend the day in soot, then put their rods, brushes and cameras back in the van. Cold...
- Safe EngineersSafe engineers service heavy bolt work, hinges and key locks that may not have moved in years. Cold...
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.







