Ballistol for Panel Builders & Switchgear Makers
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Cold Degreaser 200ml
£7.45 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
-
Ballistol Universal Oil
From £4.50 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Clean enclosures for labels
Cold Degreaser lifts grease and sticker glue from metal and plastic.
Doors that close properly
PTFE Spray lubricates hinges and locks with a dry film that does not hold dust.
Gaskets kept supple
Silicone Oil stops rubber door gaskets drying out, cracking or sticking.
Tools kept rust-free
A thin film of Universal Oil keeps rust off punches, cutters and hole saws.
Application
-
Cold Degreaser 200ml
Spray an even coat over grease or old glue on the enclosure and wipe it off with a clean cloth before labelling.
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Before any equipment is fitted, spray a thin coat onto hinges and lock mechanisms from 15 to 20cm and let it dry for a few minutes.
-
Silicone Oil Spray, 65ml
Wipe the door gasket clean, apply a thin coat with a cloth and buff off the excess.
-
Ballistol Universal Oil
Wipe punches and cutters clean, spray a light coat and wipe off the excess before they go back in the drawer.
Areas
Metalwork
Punching, drilling and cutting enclosures and gland plates.
Build area
Door hinges, locks and gaskets on enclosures being fitted out.
Final inspection
Enclosures cleaned of grease and glue before labelling and despatch.
Stores
Bare steel stock, spare gland plates and tooling.
Uses
- Freeing stiff enclosure door hinges and locks with dry PTFE
- Keeping enclosure door gaskets supple
- Cleaning grease and label glue off enclosures before final labelling
- Removing protective film residue from stainless enclosures
- Protecting punches, cutters and hole saws from rust
- Protecting bare gland plates and steel stock in the stores
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.





