Ballistol for Shopfitters

Shopfitters build counters, displays and storage that have to work from opening day, often in finished spaces where oil marks matter. PTFE Spray suits drawer runners, sliding counter doors and display mechanisms because its film is dry. Resin Remover keeps saw blades clean in the joinery shop, and Cold Degreaser lifts stickers and glue before handover.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

No wet film near finishes

PTFE Spray lubricates without leaving a wet, oily film on new joinery.

Joinery shop blades kept clean

Resin Remover softens resin so it wipes off without residue.

Glass ready for handover

Glass Cleaner leaves glass streak-free with an invisible film that delays new dirt.

Labels off fixtures

Cold Degreaser removes stickers and the glue left behind.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean the runner or slide and let it dry. Spray a thin, even coat from 15 to 20cm and leave it a few minutes before use.

  • Resin Remover

    Take the blade off the saw, spray both faces and leave it a few minutes. Wipe the resin away and oil the blade before it goes back on.

  • Cold Degreaser 200ml

    Spray label glue or grease on glass, metal and plastic and wipe clean.

  • Glass Cleaner

    Spray glazed displays and wipe with a microfibre cloth before it dries.

  • Ballistol Universal Oil

    Give stiff cabinet locks two or three short bursts, work the key and wipe off the excess.

Areas

Joinery shop

Saw blades, router cutters and machine slides.

Counters and storage

Drawer runners, sliding doors and cabinet locks.

Displays

Slide rails, mechanisms and glazed cases.

Handover

Glass and fixtures that need labels and glue removed.

Uses

  • Lubricating drawer runners and sliding counter doors with a dry film
  • Easing display mechanisms, slide rails and cabinet locks
  • Cleaning resin off saw blades and cutters in the joinery shop
  • Removing stickers, labels and glue from glass and fixtures
  • Cleaning glazed displays at handover
  • Degreasing metalwork before painting

Ordering in volume

Shopfitters often order per project, with the joinery shop restocked separately. A roll-out across many stores can be quoted as one order.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.