Ballistol for Fabrication & Welding Shops

Fabricators work with steel that starts to rust soon after it arrives, and with clamps, jigs and vice screws that seize in a cold unit. Universal Oil frees them and keeps damp off finished work. Cold Degreaser cleans oil and grease off fabrications before painting, and PTFE Spray keeps roller shutters and trolley wheels moving.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clamps that keep working

Universal Oil creeps into seized clamp and vice threads, and it does not go sticky afterwards.

Clean steel for paint

Cold Degreaser removes oil, grease and soot so paint goes onto a clean surface.

Rust held off finished work

A thin film keeps damp off steel while it waits for collection or finishing.

Clear safety glasses

Optics Cleaner lifts dust and smears from safety glasses and face shields and leaves no residue.

Application

  • Ballistol Universal Oil

    Wipe off grit, give the thread two or three short bursts and leave it at least 15 minutes, or overnight if it is badly rusted. Use the aerosol away from sparks, hot work and naked flames.

  • Cold Degreaser 200ml

    Spray a flat, even coat over the oily area and wipe it off before the work goes for painting.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry shutter runners and trolley wheels, shake the can and spray a thin coat from 15 to 20cm. Leave it a few minutes to dry.

  • Optics & Lens Cleaner Spray, 30ml

    Blow off loose grit, spray one or two pumps onto a clean microfibre cloth and wipe from the centre outwards. Polish with a dry part of the cloth.

Areas

Fit-up and welding bays

Clamps, jigs and vice screws that seize in a cold, damp unit.

Paint prep

Fabrications that need oil and grease removing before painting.

Yard and stock

Cut steel, finished work and racking exposed to the weather.

Unit doors

Roller shutters, sliding doors and trolley wheels.

Uses

  • Freeing seized G-clamps, toggle clamps and vice screws
  • Keeping rust off cut steel and finished work waiting for collection
  • Degreasing fabrications before painting
  • Protecting grinders, drills and hand tools left in a cold unit
  • Lubricating roller shutters, trolley wheels and cable winches with dry PTFE
  • Cleaning safety glasses and face shields

Ordering in volume

Fabrication shops tend to order Universal Oil and Cold Degreaser together, with a top-up before winter when a cold, damp unit starts to mark steel. Firms with site teams often add a set for each van.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.