Ballistol for Sign Makers

Sign makers fit and remove vinyl, glass manifestations and fixings, and run plotters and routers in the workshop. Cold Degreaser takes off old stickers and the glue left behind, and degreases panels before painting. Glass Cleaner leaves windows streak-free after fitting, and Universal Oil frees seized fixings on old signs before they come down.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Old vinyl glue removed

Cold Degreaser lifts stickers and the glue left behind from glass, metal and plastic.

Streak-free windows

Glass Cleaner removes fingerprints, grease and dust and leaves an invisible film.

Old fixings released

Universal Oil creeps into fine gaps in rusted screws and bolts on old signs.

Suits machine rails

PTFE Spray's dry, non-conductive film suits slide rails and mechanisms near electronics.

Application

  • Cold Degreaser 200ml

    Peel off the old vinyl, spray the glue left behind, let it work and wipe clean. Spray and wipe panels before painting.

  • Glass Cleaner

    Spray the glass and wipe with a microfibre cloth before it dries, avoiding runs.

  • Ballistol Universal Oil

    Spray rusted fixings and leave them at least 15 minutes, or overnight, before trying again.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Check the machine maker's guidance first. Clean the rail, spray a thin, even coat from 15 to 20cm and leave it a few minutes to dry.

Areas

Fitting jobs

Shop windows, glass doors and panels.

Removals

Old vinyl, glue and seized fixings.

Workshop

Plotters, routers and their slide rails.

Stores

Brackets, fixings and metal blanks.

Uses

  • Removing old vinyl and the glue left behind
  • Degreasing panels and metalwork before painting
  • Cleaning windows after fitting graphics
  • Freeing seized fixings on old signs
  • Lubricating slide rails on plotters and routers, where the maker allows
  • Protecting brackets and fixings in stock from rust

Ordering in volume

Sign companies tend to order Cold Degreaser and Glass Cleaner by the case, as they use them on most fitting jobs, with oil and PTFE Spray for the workshop.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.