Ballistol for Electronics Assembly

Electronics assembly lines keep Ballistol away from the boards and use it on the kit around them. PTFE Spray lubricates conveyor guides, drawer runners and fixture slides with a dry film that does not attract dust. Cold Degreaser removes label glue and grease from casings and enclosures, and Universal Oil protects cutters, crimpers and metal fixtures from rust.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Kept away from the boards

Each product here goes on the equipment, casings and tools around the line.

A dry film that stays clean

PTFE Spray does not attract dust the way a wet oil does.

Clean casings

Cold Degreaser lifts label glue and grease from plastic and metal.

Tools protected

A thin film of Universal Oil keeps damp off cutters and crimpers.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    With the equipment switched off, clean and dry the guide or runner, shake the can and spray a thin coat from 15 to 20cm. Let it dry for a few minutes before use.

  • Cold Degreaser 200ml

    Spray an even coat onto the label glue or grease on the casing, away from any boards or open electronics, and wipe it off.

  • Ballistol Universal Oil

    Wipe tools clean, spray a light coat and wipe off the excess so a thin film is left.

  • Optics & Lens Cleaner Spray, 30ml

    Spray one or two pumps onto a microfibre cloth, never onto the lens itself, wipe from the centre outwards and polish with a dry part of the cloth.

  • Silicone Oil Spray, 65ml

    Wipe the gasket clean, apply a thin coat with a cloth and buff off the excess.

Areas

Production line

Conveyor guides, fixture slides and component storage.

Final assembly

Casings and enclosures with label glue or grease on them.

Tool crib

Cutters, crimpers and hand tools.

Inspection

Camera lenses and safety glasses.

Uses

  • Lubricating conveyor guides and fixture slides with dry PTFE
  • Removing label glue and grease from casings and enclosures
  • Protecting cutters, crimpers and hand tools from rust
  • Lubricating drawer runners on component storage
  • Cleaning inspection camera lenses and safety glasses
  • Keeping rubber gaskets on enclosures supple

Ordering in volume

Assembly sites usually buy PTFE Spray and Cold Degreaser by the case for the line and smaller amounts of Universal Oil for the tool crib. Reorders then follow on a regular cycle.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.