Ballistol for Cosmetics Manufacturers

Cosmetics plants fill tubes, jars, bottles and sticks on lines with many small moving parts and frequent changeovers. Ballistol H1 Food Oil is non-staining, has no smell or taste and is listed for cosmetics manufacturing where incidental contact is possible. PTFE Spray and Universal Oil look after plant, doors and the workshop away from product.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Listed for cosmetics

Cosmetics manufacturing is one of the uses given for H1 Food Oil.

No smell of its own

It has no smell or taste and will not taint products.

Non-staining on plastics

It is non-staining and compatible with most plastics and rubber.

Dry film in the warehouse

PTFE Spray stops doors and runners sticking without an oily film.

Application

  • Ballistol H1 Food Oil

    Apply sparingly to filler, capper and labeller moving parts and wipe off the excess before the line runs.

  • Changeovers

    When change parts go back on, put a small amount of H1 Food Oil on the moving parts and wipe back the excess.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    For store doors, runners and trolley wheels away from product, spray a thin coat from 15 to 20cm onto the clean, dry part.

  • Cold Degreaser 200ml

    In the workshop, spray an even coat onto label glue or grease and wipe clean.

  • Ballistol Universal Oil

    For workshop tools and plant away from product only. Spray a thin coat and wipe off the excess.

Areas

Filling hall

Tube, jar and bottle fillers.

Capping and labelling

Cappers, labellers and conveyors.

Warehouse

Doors, runners and trolleys.

Workshop

Change parts, tools and parts cleaning.

Uses

  • Lubricating tube, jar and bottle fillers
  • Lubricating capping and labelling machines
  • Keeping conveyors and change parts moving freely
  • Protecting steel parts from rust after cleaning
  • Keeping store doors, runners and trolleys moving away from product
  • Removing label glue and grease in the workshop

Ordering in volume

Cosmetics makers often order H1 Food Oil for the filling hall and PTFE Spray for the warehouse on one purchase order. Contract fillers running several lines usually set a repeat order.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.