Ballistol for Plastics & Rubber Manufacturers

Extrusion, calendering and rubber processing lines run on steel dies, rollers and guides that rust when a line stands, and on rubber seals that dry out. Universal Oil protects the steel and frees seized fittings, Silicone Oil keeps rubber seals and O-rings supple, and H1 Food Oil suits lines making food-grade film, tube or seals.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Steel protected when lines stand

A thin film of Universal Oil keeps damp off dies, rollers and guides.

Rubber kept supple

Silicone Oil keeps seals and O-rings from drying out, cracking or sticking.

Kind to most materials

Universal Oil suits rubber and oil-resistant plastics, and H1 Food Oil is compatible with most plastics and rubber.

A food-grade option

H1 Food Oil is NSF H1 registered for machinery where incidental food contact is possible.

Application

  • Ballistol Universal Oil

    Wipe off dirt, spray a thin coat over bare steel and leave it a few minutes before wiping off the excess. On an unknown plastic, test a hidden spot first.

  • Silicone Oil Spray, 65ml

    Wipe the seal or O-ring clean, apply a thin coat with a cloth and buff off the excess. Keep it off floors and walkways, which it makes slippery.

  • Cold Degreaser 200ml

    Spray an even coat over oily rollers and parts and wipe clean before restart.

  • Ballistol H1 Food Oil

    Apply sparingly to gears, bearings and conveyors on food-grade lines and wipe off the excess.

Areas

Extrusion lines

Dies, haul-offs, cutters and guides.

Calenders and mixers

Rollers and fittings that rust when the line is stood.

Doors and housings

Rubber seals and gaskets on machine guards and plant room doors.

Food-grade production

Machinery making film, tube or seals for food use.

Uses

  • Protecting dies, rollers and guides while a line is stood
  • Keeping rubber seals and O-rings supple with Silicone Oil
  • Lubricating haul-off slides and cutter guides with dry PTFE
  • Degreasing rollers and parts before restart
  • Lubricating machinery on food-grade lines with H1 Food Oil
  • Freeing seized bolts on dies and fixtures

Ordering in volume

Processors usually buy ahead of planned shutdowns, when dies and rollers are cleaned and laid up. Larger sites often split the order between the maintenance stores and the production floor.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.