Ballistol for Hydraulics & Pneumatics Engineers

Hydraulic and pneumatic engineers rebuild cylinders, pumps and valves, then send them back out to site or into stores. Universal Oil keeps rust off machined rods and spares, and it frees seized unions and fixings on strip-down. Cold Degreaser cleans oil and grease off the outside of units before inspection. None of these products go inside a hydraulic or pneumatic system.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Rebuilt parts protected

A thin film of Universal Oil keeps damp off machined rods and spares in stores.

Seized unions freed

Its low surface tension lets it creep into fine gaps in rusted threads.

Clean for inspection

Cold Degreaser removes oil and grease so wear and damage are easier to see.

Dry film for van kit

PTFE Spray suits drawer runners and hose reels without collecting grit.

Application

  • Ballistol Universal Oil

    Wipe the outside of the part clean, spray a thin coat on bare metal and wipe off the excess. On seized unions, leave it at least 15 minutes, or overnight.

  • Cold Degreaser 200ml

    Spray an even coat over the oily outside of the unit and wipe it clean before inspection, labelling or painting.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry drawer runners and hose reel parts, spray a thin coat from 15 to 20cm and let it dry for a few minutes.

Areas

Strip-down bench

Cylinders, pumps and valves coming in for repair.

Rebuild and test

Outside surfaces of units being inspected and labelled.

Stores

Rods, spares and rebuilt units waiting to go out.

Service vans

Tools, test kit, drawer runners and hose reels.

Uses

  • Protecting machined rods and spares in stores
  • Freeing seized unions, fittings and fixings on strip-down
  • Degreasing the outside of units before inspection or painting
  • Protecting tools and test kit in the van
  • Lubricating van racking runners and hose reels with dry PTFE
  • Removing old labels and glue before re-tagging serviced units

Ordering in volume

Service firms usually order a set of products for each van plus 5 litre Universal Oil for the workshop. Orders then follow a regular cycle once usage is known.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.