Ballistol for Violin Makers & Restorers

Violin makers and restorers work with sharp edge tools, spruce and maple, and a lot of fine metal fittings. Universal Oil protects gouges, knives and planes from rust and frees stiff fine tuners and case hardware. Resin Remover lifts spruce resin from blades and planes, and Optics Cleaner keeps loupes and magnifiers clear for close work.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Edge tools protected

A thin film of Universal Oil keeps damp off gouges and planes.

Resin lifted

Resin Remover softens resin from spruce and other conifers so it wipes off.

Small fittings freed

Universal Oil creeps into stiff fine tuners and case catches.

Clear close work

Optics Cleaner leaves no water marks or residue on loupes and magnifiers.

Application

  • Ballistol Universal Oil

    Wipe tools with a thin coat and wipe off the excess. On an unfinished fingerboard, rub a little in with a cloth, leave it to soak in and buff, keeping it off the varnish.

  • Resin Remover

    Spray the plane iron or blade, leave it to soak for a few minutes and wipe clean. Wear gloves, and oil the steel afterwards.

  • Optics & Lens Cleaner Spray, 30ml

    Brush off any grit, spray onto a microfibre cloth and wipe from the centre outwards, then polish dry.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Shake the can and hold it 15 to 20cm from the clean, dry catch or hinge. One thin coat is enough.

Areas

Carving bench

Gouges, knives, planes and scrapers.

Set-up

Fine tuners, chinrest fittings and unfinished fingerboards.

Cases

Catches, hinges and locks.

Close work

Loupes and magnifiers.

Uses

  • Protecting gouges, knives, planes and scrapers from rust
  • Cleaning spruce resin off planes and blades
  • Feeding unfinished ebony fingerboards, kept off the varnish
  • Freeing stiff fine tuners and chinrest fittings
  • Freeing stiff case catches and hinges
  • Cleaning loupes and magnifiers

Ordering in volume

Makers and restorers buy steadily in small amounts, so larger orders usually come from workshops with several benches, violin shops and teaching workshops.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.