Ballistol for Body Shops

Paint fails when the surface underneath is not clean. Cold Degreaser removes oil, grease and old sticker glue from panels and parts before they go into the booth, and Dry Cleaner & Detailer gives a finishing shine on paint, chrome and plastic. Keep oils away from anything about to be painted and use them on tools, hinges and bare metal in storage.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clean surfaces for paint

Cold Degreaser removes oil, grease and organic dirt before painting.

Sticker glue gone

It also lifts stickers and the glue they leave behind.

A finish for handover

Dry Cleaner & Detailer contains polymers and waxes for a deep shine on paint, chrome and plastic.

Silicone-free interior cleaner

Universal & Plastic Cleaner is silicone-free, which suits a shop that keeps silicone away from paint.

Application

  • Cold Degreaser 200ml

    Spray an even coat onto the panel or part, let it work on the grease and wipe off with a clean cloth before priming.

  • Dry Cleaner & Detailer

    Spray evenly onto paint, chrome or plastic, wipe with a soft microfibre cloth and buff off with a dry one. Not in strong sun or on hot panels.

  • Ballistol Universal Oil

    Spray a thin coat on bare steel panels and tools going into storage and wipe off the excess. Degrease anything oiled before it is painted.

  • Universal & Plastic Cleaner

    Spray onto plastic trim or seat fabric, give it a short time to work and wipe off with a microfibre cloth.

Areas

Prep bay

Panels and parts that need degreasing before primer.

Paint booth

Door hinges, runners and the booth's roller door.

Finishing bay

Paint, chrome, trim and glass before the car goes back.

Panel store

Bare steel repair panels and brackets waiting to be fitted.

Uses

  • Degreasing panels and parts before priming and painting
  • Removing stickers, decals and the glue left behind
  • Finishing paint, chrome and trim after a repair
  • Bringing the colour back to plastic trim
  • Protecting bare steel repair panels in stock from rust
  • Lubricating booth door hinges and roller doors with dry PTFE

Ordering in volume

Body shops get through Cold Degreaser quickly, so it usually makes up most of the order, with car care lines added for the finishing bay. Busy shops tend to reorder regularly rather than hold a large stock.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.