Ballistol for Electric Motor Rewinders

Motor rewinders strip, clean and rebuild motors that often come in oily, rusty and seized. Universal Oil frees seized end shield bolts and fan cover fixings, and protects bare shafts and spigots once the motor is rebuilt. Cold Degreaser cleans oil and grease off frames before painting. Keep these products off windings and other electrical parts.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Seized bolts freed

Universal Oil creeps into rusted threads, so end shields and covers come off with less force.

Clean frames for paint

Cold Degreaser removes oil, grease and organic dirt from metal and plastic.

Shafts protected in stores

A thin film keeps damp off bare shafts and spigots until the motor goes back.

Supple gaskets

Silicone Oil keeps terminal box gaskets from drying out and cracking.

Application

  • Ballistol Universal Oil

    Give seized bolts two or three short bursts and leave them at least 15 minutes, or overnight. After the rebuild, wipe a thin film over bare shafts and spigots only, never on windings.

  • Cold Degreaser 200ml

    With the windings removed or covered, spray an even coat over the oily frame and wipe clean before painting.

  • Silicone Oil Spray, 65ml

    Wipe the terminal box gasket clean, apply a thin coat with a cloth and buff off the excess.

Areas

Strip-down

Seized bolts, fan covers and end shields on incoming motors.

Cleaning and paint

Frames and covers that need oil and grease removing before paint.

Rebuild

Shafts, keys, spigots and terminal box gaskets.

Stores and despatch

Rebuilt motors and spares waiting for collection.

Uses

  • Freeing seized end shield bolts and fan cover screws
  • Cleaning oil and grease off motor frames before painting
  • Protecting bare shafts, keys and spigots on rebuilt motors
  • Keeping terminal box gaskets supple
  • Protecting pullers and hand tools from rust
  • Removing old labels and glue from frames

Ordering in volume

Rewind shops usually buy Universal Oil in 5 litres for the strip-down bench and Cold Degreaser by the case for paint prep. Most reorder on a steady cycle that follows the repair workload.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.