Ballistol for University Research Labs

University labs sit inside large estates, with teaching labs, research groups, technical workshops and stores all buying their own supplies. Ballistol PTFE Spray, Universal Oil and Cold Degreaser cover routine workshop and bench jobs. Optics Cleaner suits safety glasses, camera lenses and the objective lenses of refracting telescopes used in teaching.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Workshop basics

Universal Oil cleans, lubricates and protects metal against rust.

Dry where it matters

PTFE Spray leaves a non-conductive film that does not pick up dust.

Clear optics

Optics Cleaner evaporates fully and is suitable for plastic lenses.

Label residue

Cold Degreaser lifts stickers and old glue from glass, metal and plastic.

Application

  • Ballistol Universal Oil

    On tools and metal stock, wipe off loose dirt, spray a thin coat and wipe off the excess, leaving a light film. Re-apply every few months in a damp store.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the runner or rail, spray a thin coat from 15 to 20cm and leave it a few minutes before use.

  • Optics & Lens Cleaner Spray, 30ml

    Blow or brush off grit, spray one or two pumps onto a microfibre cloth and wipe from the centre outwards. Do not use it on the mirrors of a reflecting telescope.

  • Cold Degreaser 200ml

    Spray an even coat onto old labels or grease and wipe clean.

  • Silicone Oil Spray, 65ml

    Apply a thin coat to rubber seals and plastic catches with a cloth and buff off the excess.

Areas

Technical workshop

Tools, metal stock and machine parts.

Teaching labs

Drawer runners, sliding doors and safety glasses.

Research labs

Slide rails, catches, seals and camera lenses.

Optics teaching

Refractor lenses, eyepieces and finder scopes.

Uses

  • Protecting tools and metal stock in the technical workshop
  • Lubricating drawer runners, slide rails and sliding doors
  • Removing old labels and grease from benches and kit
  • Cleaning safety glasses and camera lenses
  • Cleaning refracting telescope lenses and eyepieces for teaching
  • Caring for rubber seals and plastic catches

Ordering in volume

University orders usually go through procurement on a purchase order, sometimes split by department or cost code. Tell us which departments are buying and we can quote for each or for the total.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.