Ballistol for Skate Shops & Skateparks

Skate shops fit and service boards, scooters and BMX bikes, and skateparks have gates, fixings and signs that take a beating. PTFE Spray suits bearings, truck pivots and scooter clamps because its dry film does not hold grit. Universal Oil frees seized axle nuts and fixings, Cold Degreaser lifts stickers and glue, and the bike range covers BMX chains.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

A dry film for bearings

PTFE Spray cuts friction and does not pick up dust and grit the way oil does.

Seized hardware freed

Universal Oil creeps into rusted threads on axles and fixings.

Stickers off

Cold Degreaser removes stickers and the glue left behind.

BMX covered

Chain Cleaner and Bike X Lube strip and re-lube chains.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old lubricant and let the part dry. Spray a thin coat from 15 to 20cm and leave it a few minutes before riding. Keep it off decks and riding surfaces.

  • Ballistol Universal Oil

    Spray seized axle nuts and fixings and leave at least 15 minutes. Wipe off the excess, and keep it off grip tape, decks and ramps.

  • Cold Degreaser 200ml

    Spray onto stickers and glue residue and wipe them away.

  • Chain Cleaner

    Spray the BMX chain, leave it a minute or two, scrub with a brush and wipe dry before re-lubing.

  • Bicycle Care Oil 200ml

    Spray the lower run of the chain while turning the pedals backwards, leave a few minutes and wipe the outside of the chain.

Areas

Shop workshop

Bearings, trucks, axles and scooter clamps.

BMX corner

Chains and drivetrains on BMX bikes.

Skatepark

Gates, padlocks, signs and fixings.

Shop fittings

Display units, stickers and glue residue.

Uses

  • Lubricating bearings and truck pivots with a dry film
  • Freeing seized axle nuts and kingpins
  • Lubricating scooter clamps and folding parts
  • Cleaning and lubing BMX chains
  • Removing stickers and glue from signs and shop fittings
  • Protecting skatepark gates, padlocks and fixings from rust

Ordering in volume

Shops usually order workshop stock with shelf stock in spring, and skateparks run by councils or trusts tend to order maintenance products once a year.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.