Ballistol for Boatyards & Boatbuilders

Boatyards live by fitting-out and lay-up, and boatbuilders by the workshop. Universal Oil frees seized fittings and protects metal through the winter, Cold Degreaser cleans parts before painting, and Resin Remover keeps saw blades, planes and chisels clean for joinery. PTFE Spray suits sliding hatches and tracks, and Silicone Oil looks after hatch seals.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Fittings that come apart

Universal Oil creeps into seized threads and pins. Leave it overnight on the worst.

Protection through lay-up

It does not resinify, so the film stays thin on fittings left all winter.

Clean cutting tools

Resin Remover lifts resin from blades and chisels without leaving residue.

Hatches that slide

PTFE Spray leaves a dry film that does not hold grit.

Application

  • Ballistol Universal Oil

    Spray seized fittings and leave at least 15 minutes, or overnight. Before lay-up, spray a thin coat on deck fittings and wipe off the excess.

  • Resin Remover

    Spray the blade or chisel, leave it a few minutes and wipe clean with kitchen roll. Oil the steel afterwards with Universal Oil, and wear gloves.

  • Cold Degreaser 200ml

    Spray an even coat on metal and plastic parts and wipe off before painting.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry hatch runners and tracks, spray a thin coat from 15 to 20cm and let it dry.

  • Silicone Oil Spray, 65ml

    Wipe hatch seals and O-rings clean, apply a thin coat and buff off the excess.

Areas

Hard standing

Boats laid up over winter.

Fitting-out

Seized shackles, pins and fittings in spring.

Joinery shop

Saw blades, planes and chisels.

Paint shed

Parts degreased before paint.

Uses

  • Freeing seized shackles, pins and fittings at fitting-out
  • Protecting deck fittings and bare metal over lay-up
  • Cleaning resin off saw blades, planes and chisels in the joinery shop
  • Degreasing metal and plastic parts before painting
  • Lubricating sliding hatches and tracks with dry PTFE
  • Caring for rubber hatch seals and O-rings

Ordering in volume

Yards tend to place their biggest orders ahead of spring fitting-out and autumn lay-up. The 5 litre Universal Oil and Resin Remover suit workshops that decant into smaller bottles.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.