Ballistol for Lighting Installers

Lighting installers fit and maintain fittings indoors and out, from shop lighting to columns and floodlights. Cold Degreaser cleans grease and grime off glass diffusers and housings, and Silicone Oil keeps rubber gaskets on outdoor fittings supple. Universal Oil frees seized column door locks and bolts, and PTFE Spray suits access hatch and enclosure hinges.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clear diffusers

Cold Degreaser removes grease and soot from glass and plastic.

Gaskets kept supple

Silicone Oil keeps rubber gaskets from drying out and cracking.

Column doors that open

Universal Oil creeps into seized locks and bolts exposed to the weather.

Streak-free glass

Glass Cleaner leaves a streak-free shine on glass and smooth surfaces.

Application

  • Cold Degreaser 200ml

    On a cool fitting, spray an even coat over the diffuser or housing and wipe off the grease and grime.

  • Silicone Oil Spray, 65ml

    Wipe the gasket clean, apply a thin coat with a cloth and buff off the excess.

  • Ballistol Universal Oil

    Give the lock or bolt two or three short bursts and leave it at least 15 minutes, or overnight on badly rusted ones. Keep it to the door hardware.

  • Glass Cleaner

    Spray onto the glass and wipe with a microfibre cloth before it dries, avoiding runs.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the hinge, shake the can and spray a thin coat from 15 to 20cm. Leave it a few minutes to dry.

Areas

Street and site lighting

Column doors, locks and access bolts.

Floodlights and outdoor fittings

Rubber gaskets and glass fronts.

Commercial interiors

Diffusers and housings that collect grease and dust.

Vans

Tools, fixings and spares.

Uses

  • Cleaning grease and grime from glass diffusers and housings
  • Keeping rubber gaskets on outdoor fittings supple
  • Freeing seized locks and bolts on lighting column doors
  • Lubricating access hatch and enclosure hinges with dry PTFE
  • Protecting tools and fixings in the van from rust
  • Removing old labels and sticker glue from fittings

Ordering in volume

Lighting contractors usually equip each van with the same kit and reorder for the fleet together. Teams looking after external lighting often top up before the darker months.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.