Ballistol for Blacksmiths

A forge is hard on tools. Tongs, hammers, swages and the anvil face rust quickly once the fire is out, and finished ironwork needs protecting before it leaves the workshop. Universal Oil leaves a light film that keeps damp off steel, cares for leather aprons and wooden handles, and cleans light tarnish from brass. Keep the aerosol well away from the fire.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Tools ready for the next heat

A thin film of Universal Oil keeps damp off tongs, hammers and the anvil.

Finished work protected

A light film keeps damp off bare steel while it waits for collection.

Leather and wood too

Universal Oil keeps smooth leather aprons supple and cares for dry handles.

Clean before paint

Cold Degreaser removes oil and grease before painting, varnishing or browning.

Application

  • Ballistol Universal Oil

    Once the work and tools have cooled, wipe off scale and dirt, apply a thin coat with a cloth and wipe off the excess. Keep the aerosol away from heat, sparks and naked flames.

  • Cold Degreaser 200ml

    Spray the cooled work, let it act and wipe off oil and grease before painting or browning.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    On finished gates and latches, clean and dry the hinge, spray a thin coat and leave it a few minutes to dry.

Areas

Hearth and anvil

Tongs, hammers, swages and the anvil face.

Vice and bench

Leg vice, bench tools and wooden handles.

Finishing

Work being degreased for paint or protected for collection.

Leather

Aprons and tool rolls in smooth leather.

Uses

  • Protecting tongs, hammers and swages from rust between sessions
  • Protecting the anvil face, vices and swage blocks
  • Protecting finished ironwork before it goes to the customer
  • Degreasing work before painting or browning
  • Caring for leather aprons and wooden hammer handles
  • Easing hinges and latches on finished gates

Ordering in volume

Forges and smithing schools usually buy Universal Oil in 500ml bottles or the 5 litre can, which work out cheaper per millilitre than sprays. Courses can order for every student's bench.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.