Ballistol for Custom Rifle Builders

A custom build needs a bore cleaned back to bare metal and a finished rifle that leaves the workshop protected. Robla Solo Mil removes copper fouling, GunCer Ceramic Grease suits bolt lugs and other high-load contact points, and Universal Oil protects the metal without leaving a sticky film.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Back to bare metal

Robla Solo Mil dissolves copper fouling in the bore.

Grease for bolt lugs

GunCer is made for high-load contact points.

No sticky film

Universal Oil protects without resinifying.

Stock finishing

Balsin brings out the grain and weatherproofs walnut.

Application

  • Robla Solo Mil

    During break-in, plug the barrel, pour in the cleaner and let it work between firing sessions.

  • Guncer Ceramic Grease

    Apply sparingly to clean bolt lugs and cocking cams with the dosing tip.

  • Special Cleaning Felts

    For heavily fouled bores, push through a felt with brass fibres sized to the calibre.

  • Ballistol Universal Oil

    Before dispatch, wipe a thin film over the metal to protect it in storage and transit.

  • Balsin Gun Stock Oil

    Rub into the stock, let it soak in and build up the finish.

Areas

Barrel break-in

Copper fouling between firing sessions.

Assembly

Actions and barrels during bedding and fitting.

Stock work

Walnut stocks being finished.

Dispatch

Finished rifles in storage and transit.

Uses

  • Removing copper fouling during barrel break-in
  • Cleaning actions and barrels during bedding and assembly
  • Greasing bolt lugs and cocking cams
  • Oiling walnut stocks
  • Protecting finished rifles in storage and transit

Ordering in volume

Builders usually order bore cleaner and grease in workshop quantities. If you send each rifle out with a care kit, we can quote for the products to go in it.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.