Ballistol for Lift & Escalator Engineers
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Ballistol Universal Oil
From £4.50 retail
-
Cold Degreaser 200ml
£7.45 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
For the jobs around the schedule
Ballistol covers the small door, lock and panel jobs, alongside the lubricants the lift maker specifies.
Non-conductive dry film
PTFE Spray's film is dry and non-conductive, which suits mechanisms near electronics.
Tools protected between calls
A thin film of Universal Oil keeps damp off tools carried in the van.
Clean before inspection
Cold Degreaser removes oil and grease from metal, plastic and glass.
Application
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Clean off dirt and old lubricant and let the part dry. Spray a thin, even coat from 15 to 20cm on hangers and linkages and leave it a few minutes before running the doors.
-
Ballistol Universal Oil
Give a stiff panel or machine room lock two or three short bursts, work the key a few times and wipe off the excess.
-
Cold Degreaser 200ml
Spray oily covers and casings and wipe clean before inspection.
-
Silicone Oil Spray, 65ml
Wipe rubber door and hatch seals clean, apply a thin coat with a cloth and buff off the excess. Keep it off floors and steps.
Areas
Landing and car doors
Hangers, linkages and door seals.
Machine rooms
Door locks, panels and covers.
Escalator access
Cover plates and casings cleaned of grease before inspection.
Engineer's van
Tools, keys and spares carried between sites.
Uses
- Lubricating landing door hangers and linkages with a dry film
- Freeing stiff machine room and panel locks
- Protecting tools and spares in the van from rust
- Cleaning grease and oil off covers, panels and casings
- Keeping rubber seals on doors and hatches supple
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.





