Ballistol for Meat & Poultry Processors

Meat and poultry plants run bandsaws, mincers, dicers, slicers and packing lines through repeated washdowns. Ballistol H1 Food Oil is NSF H1 registered, repels water and protects steel against rust, and meat and poultry is one of the uses listed for it. Universal Oil and PTFE Spray stay in the engineering workshop and dispatch, away from food.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Listed for meat and poultry

Meat and poultry processing is one of the uses given for H1 Food Oil.

Survives washdown

It repels water and leaves a strong film against rust and oxidation.

Built for load

It lubricates moving parts under heavy load and reduces wear on saws, mincers and line chains.

Non-staining

It is compatible with most plastics and rubber.

Application

  • Ballistol H1 Food Oil

    After washdown, apply sparingly to bandsaw guides, mincer and dicer moving parts and wipe off the excess.

  • Line chains

    Use a small amount of H1 Food Oil on shackle line chains and trolleys and wipe back the excess. Low evaporation means it lasts between applications.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    For dispatch doors and runners away from food, clean and dry the part, spray a thin coat from 15 to 20cm and let it dry.

  • Ballistol Universal Oil

    In the engineering workshop only, for tools and seized fasteners on plant away from food. It is not for food contact.

  • Cold Degreaser 200ml

    Spray oily parts on the workshop bench and wipe clean before refitting.

Areas

Cutting room

Bandsaws, mincers, dicers and slicers.

Line

Shackle chains, trolleys and conveyors.

Packing

Tray sealers, flow wrappers and labellers.

Dispatch and workshop

Doors, runners, tools and plant away from food.

Uses

  • Lubricating bandsaw guides, mincers and dicers
  • Keeping slicers and portion cutters running
  • Lubricating shackle line chains and trolleys
  • Lubricating tray sealers, flow wrappers and labellers
  • Protecting knives and steel parts from rust after washdown
  • Freeing dispatch doors and maintaining tools away from food

Ordering in volume

Processors usually order H1 Food Oil through engineering stores on a purchase order, and many repeat it every month or two. Groups often order for several plants together.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.