Ballistol for Go-Kart Tracks

Kart tracks run a hire fleet hard and clean it at the end of every day. Cold Degreaser removes oil and grease from chassis and engines, Universal Oil frees seized fixings and protects bare metal over winter, and Optics Cleaner clears hire helmet visors. Dry Cleaner & Detailer brings plastic bodywork back up. Universal Oil is not for brakes, tyres or chains.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clean karts

Cold Degreaser removes oil, grease and dried oil from metal and plastic parts.

Clear visors

Optics Cleaner evaporates fully and is safe on plastic visors.

Winter protection

A thin film of Universal Oil keeps damp off bare metal on stored karts.

Bodywork refreshed

Dry Cleaner & Detailer brings the colour back to plastic.

Application

  • Cold Degreaser 200ml

    Spray an even coat over the chassis and engine, let it work and wipe clean.

  • Ballistol Universal Oil

    Spray seized fixings and leave at least 15 minutes. On stored karts, spray bare metal with a thin coat and wipe off the excess. Keep it off brakes and tyres.

  • Optics & Lens Cleaner Spray, 30ml

    Spray one or two pumps onto a microfibre cloth, wipe the visor from the centre outwards and polish with a dry part of the cloth.

  • Dry Cleaner & Detailer

    Spray evenly onto plastic bodywork, wipe with a soft cloth and buff off with a dry microfibre. Not on hot parts or in strong sun.

Areas

Workshop

Chassis, engines and seized fixings.

Hire desk

Helmet visors between sessions.

Fleet storage

Bare metal on karts stored over winter.

Pit lane

Gates, roller doors and padlocks.

Uses

  • Degreasing hire kart chassis and engines
  • Freeing seized fixings in the workshop
  • Protecting bare metal on the fleet over winter
  • Cleaning hire helmet visors between sessions
  • Bringing colour back to plastic bodywork
  • Lubricating pit lane gates and garage roller doors with dry PTFE

Ordering in volume

Tracks usually order workshop lines by the case and visor cleaner for the hire desk. Bigger orders tend to come before the summer and for the winter rebuild.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.