Ballistol for Pump & Valve Engineers

Pump and valve engineers strip, repair and test units in the workshop, then fit them back on site. Universal Oil frees seized flange bolts and spindles and protects machined faces and spares, and Cold Degreaser cleans oil and grease off casings before inspection. For pumps on food and drink sites, H1 Food Oil is NSF H1 registered and has no smell or taste.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Easier strip-downs

Universal Oil creeps into rusted bolts and spindles.

Machined faces protected

A thin film keeps damp off shafts, faces and spares in stores.

Clean for inspection

Cold Degreaser removes oil, grease and diesel deposits from casings.

H1 for food sites

H1 Food Oil has no smell or taste and will not taint products.

Application

  • Ballistol Universal Oil

    Spray seized bolts and spindles and leave them at least 15 minutes, or overnight on badly rusted ones. After the rebuild, wipe a thin film over bare machined faces.

  • Cold Degreaser 200ml

    Spray an even coat over the oily casing and wipe clean before inspection or painting.

  • Ballistol H1 Food Oil

    On food and drink sites, apply sparingly where incidental food contact is possible and wipe off the excess.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the runner or reel, shake the can and spray a thin coat from 15 to 20cm. Let it dry for a few minutes.

Areas

Strip-down bench

Pumps and valves coming in for repair.

Test bay

Casings cleaned before inspection and painting.

Stores

Machined spares, shafts and rebuilt units.

Site service

Tools and products carried in the van.

Uses

  • Freeing seized flange bolts, gland nuts and spindles on strip-down
  • Protecting machined faces, shafts and spares in stores
  • Degreasing casings before inspection or painting
  • Lubricating pumps on food and drink sites with H1 Food Oil
  • Protecting tools and test kit in the van
  • Lubricating van racking runners and hose reels with dry PTFE

Ordering in volume

Service firms tend to buy 5 litre Universal Oil for the workshop and a set of cans for each engineer. Firms with food and drink customers usually add H1 Food Oil to the same order.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.