Ballistol for Bike Shops & Workshops

Bike shops get through chain cleaner and lube faster than anything else on the bench, and sell the same products to riders across the counter. Chain Cleaner strips old lube and grit, Bike X Lube is an all-season wet lube that repels water, and Bicycle Cleaner foam shifts dried-on mud. PTFE Spray and Universal Oil look after cables, tools and workstands.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clean before you lube

Chain Cleaner strips off old lube mixed with grit, which wears a chain faster than no lube at all.

Will not attack the frame

Painted surfaces, chrome, aluminium, plastics, rubber and carbon are not attacked by Chain Cleaner.

A lube for UK weather

Bike X Lube repels water, protects against rust and is salt water resistant.

No sticky residue

Bike X Lube is unwaxed, and free from silicone, PTFE, acid and resin.

Application

  • Chain Cleaner

    Spray the chain and cassette and leave it a minute or two. Scrub with a brush, rinse or wipe dry, and re-lube once it is dry.

  • Bicycle Care Oil 200ml

    Shake the can, hold it close and spray the lower run of the chain while turning the pedals backwards. Leave it a few minutes, then wipe the outside of the chain with a clean, dry cloth.

  • Bicycle Cleaner

    Foam the frame, wheels and drivetrain, then wipe off or rinse with a gentle flow of water. On e-bikes, keep it off the display and connectors.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the part, shake the can and spray a thin coat on cables and pivots from 15 to 20cm. Leave it a few minutes before use.

  • Ballistol Universal Oil

    Spray a thin coat on workshop tools and stands and wipe off the excess. Keep it off brakes and bike chains.

Areas

Workshop bench

Chains, cassettes, derailleurs and cables on customer bikes.

Wash area

Muddy bikes and e-bikes in for service.

Tool wall

Hand tools, chain tools and workstands.

Shop floor

Lube, cleaner and optics cleaner for riders.

Uses

  • Stripping old lube and grit from chains and cassettes before a service
  • Lubricating chains, cassettes and derailleur pivots after a service
  • Washing customer bikes, including e-bikes, without a pressure washer
  • Stocking Bike DryLube for dry summer riding
  • Protecting workshop tools and stands from rust
  • Selling the same lube and cleaner across the counter

Ordering in volume

Shops usually split an order between workshop and shelf stock, with bigger orders before spring and a wet-weather top-up in autumn. For an ongoing trade account and price list, see our wholesale page.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.