Ballistol for Locksmiths

Locksmiths need a lubricant that reaches deep into a cylinder and does not leave a sticky residue to catch dust. PTFE Spray goes on wet, dries in minutes and leaves a dry film in the keyway. Universal Oil creeps into mortice locks and padlocks and does not resinify, and Cold Degreaser strips dried, gummed oil out of old locks before servicing.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Dry film in the keyway

PTFE Spray dries in a few minutes and does not pick up dust the way oil does.

Stays thin in mechanisms

Universal Oil does not resinify, so serviced locks do not gum up.

Old oil stripped out

Cold Degreaser removes dried, resinified oil from lock bodies and parts.

A drop where it is needed

The 15ml oil pen puts Universal Oil exactly into a lock or mechanism.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Shake the can, give the keyway a short burst and work the key a few times. Leave it a few minutes to dry, and spray again when the lock starts to stick.

  • Ballistol Universal Oil

    Give a mortice lock or padlock two or three short bursts, work it and leave it 2 to 5 minutes to creep in. Wipe off the excess.

  • Cold Degreaser 200ml

    With the lock stripped, spray the parts to dissolve dried oil and grime, wipe clean and let them dry before relubricating.

  • Silicone Oil Spray, 65ml

    On uPVC and composite doors, wipe the rubber seal clean, apply a thin coat with a cloth and buff off the excess.

Areas

Cylinders and keyways

Euro cylinders, rim locks and padlocks.

Mortice and multipoint locks

Bolts, levers and gearboxes on doors.

Workshop

Key cutting machines and stripped-down locks.

Van

Tools, drill bits and spare cylinders.

Uses

  • Lubricating cylinders and keyways with a dry PTFE film
  • Servicing mortice locks, padlocks and multipoint mechanisms
  • Stripping old, gummed oil out of seized locks
  • Lubricating slides on key cutting machines
  • Protecting tools and drill bits in the van from rust

Ordering in volume

Locksmith firms often buy for every van at once, plus stock for the shop counter. If you sell lock care to customers, add the 15ml oil pen and PTFE Spray to the same order.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.