Ballistol for Paper & Board Mills
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Ballistol Universal Oil
From £4.50 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Ballistol H1 Food Oil
From £9.99 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
-
Cold Degreaser 200ml
£7.45 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Made for damp areas
Universal Oil displaces water and leaves a film that keeps rust off steel.
Dry guides
PTFE Spray does not pick up paper dust the way a wet oil does.
Food-grade board covered
H1 Food Oil is NSF H1 registered and will not taint products.
Seals that stay supple
Silicone Oil keeps rubber seals on doors and hatches from drying out.
Application
-
Ballistol Universal Oil
Wipe off loose dirt, spray a thin coat on bare steel and work any moving parts. On seized fixings, leave it at least 15 minutes, or overnight, then wipe off the excess.
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Clean and dry the guide, shake the can and spray a thin, even coat from 15 to 20cm. Leave it a few minutes before running.
-
Ballistol H1 Food Oil
Apply sparingly to gears, bearings and rollers on food-grade lines and wipe off the excess.
-
Silicone Oil Spray, 65ml
Wipe the seal clean, apply a thin coat with a cloth and buff off the excess.
Areas
Wet end
Guards, frames and handrails in warm, damp air.
Finishing
Slitters, rewinders, cutters and their guides.
Stores
Spare shafts and machine parts waiting for a shutdown.
Plant rooms
Doors, hatches and rubber seals.
Uses
- Protecting spare shafts and machine parts in the stores
- Keeping rust off guards, frames and handrails in damp areas
- Lubricating slitter and rewinder guides with a dry PTFE film
- Freeing seized fixings during shutdowns
- Lubricating machinery on food-grade board lines with H1 Food Oil
- Keeping rubber seals on doors and hatches supple
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.






