Ballistol for Waste & Recycling Plants

Waste and recycling plants are dusty, and dust sticks to any wet oil. PTFE Spray leaves a dry film on roller shutters, guide rails and hinges that does not pick up dust and grit. Universal Oil frees seized fixings on balers, screens and guards, and Cold Degreaser cleans oil and diesel deposits off plant before inspection.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

A dry film for dusty sites

PTFE Spray does not pick up dust and grit the way oil does.

Seized fixings freed

Universal Oil creeps into rusted threads on plant and guards.

Clean plant for inspection

Cold Degreaser removes oil, grease and diesel deposits.

Cab and door seals looked after

Silicone Oil keeps rubber seals from drying out or sticking.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dust and old lubricant, let the part dry and spray a thin, even coat from 15 to 20cm. Leave it a few minutes before use and reapply when it starts to stick.

  • Ballistol Universal Oil

    Give the seized fixing two or three short bursts and leave it at least 15 minutes, or overnight. Wipe off the excess so it does not hold dust.

  • Cold Degreaser 200ml

    Spray an even coat over oily or diesel-stained areas and wipe clean before inspection.

  • Silicone Oil Spray, 65ml

    Wipe the seal clean, apply a thin coat with a cloth and buff off the excess.

Areas

Tipping hall

Roller shutters, doors and guide rails.

Processing line

Balers, screens, guards and fixings.

Mobile plant

Loaders and handlers that need cleaning before inspection, plus cab door seals.

Yard and workshop

Gates, padlocks, tools and spares.

Uses

  • Lubricating roller shutters, doors and guide rails with dry PTFE
  • Freeing seized fixings on balers, screens and guards
  • Cleaning oil and diesel deposits off mobile plant before inspection
  • Protecting tools and spares in the workshop
  • Freeing padlocks and gate fittings around the yard
  • Keeping rubber seals on doors and cabs supple

Ordering in volume

Operators usually buy for the site workshop on a regular cycle, and groups with several sites often order for all of them in one go. Tell us how many sites you run and we will quote for that.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.