Ballistol for Poultry Keepers

Poultry keepers, breeders and clubs look after coops, runs, automatic doors and feeders that sit outside all year. PTFE Spray keeps pop-hole slides and runners moving with a dry film that does not hold dust, Universal Oil frees bolts, hinges and padlocks, and H1 Food Oil is NSF H1 registered for feeder mechanisms where feed contact is possible.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Slides that do not stick

PTFE Spray leaves a dry film on pop-hole slides that does not pick up dust and grit.

Fine near electronics

The dry film is non-conductive, which suits mechanisms close to automatic door motors.

Food-grade at the feeder

H1 Food Oil has no smell or taste, and farm and feed machinery is one of its listed uses.

Bolts and padlocks freed

Universal Oil creeps into stiff mechanisms and keeps rust off the metalwork.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old lubricant and let the runners dry. Spray a thin coat from 15 to 20cm, keeping it off feeders and drinkers, and leave it a few minutes before use.

  • Ballistol Universal Oil

    Give coop bolts, hinges and padlocks two or three short bursts, work them a few times and wipe off the excess.

  • Ballistol H1 Food Oil

    Apply sparingly to treadle feeder hinges and pivots and wipe off the excess.

  • Silicone Oil Spray, 65ml

    Wipe the seals on pump sprayers clean, apply a thin coat with a cloth and buff off the excess.

Areas

Coop

Pop-hole slides, automatic door runners, bolts and hinges.

Run

Gates, padlocks and mesh fittings.

Feeders

Treadle feeder hinges and pivots.

Shed and show kit

Pump sprayers, show pen fittings and tools.

Uses

  • Keeping pop-hole slides and automatic door runners moving
  • Freeing coop bolts, hinges and run padlocks
  • Lubricating treadle feeder hinges with H1 Food Oil
  • Protecting run fittings, gates and tools from rust
  • Keeping pump sprayer seals supple for cleaning out
  • Keeping gnats and mosquitoes off on summer evenings

Ordering in volume

Clubs and breeders often order together before the show season, and keepers with several runs tend to buy once in spring and again before winter.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.