Ballistol for Plant & Tool Hire
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Ballistol Universal Oil
From £4.50 retail
-
Resin Remover
From £7.35 retail
-
Cold Degreaser 200ml
£7.45 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Clean, oil and protect in one
Universal Oil cleans, lubricates and protects a returned tool in one pass.
Sap off chainsaw chains
Resin Remover softens sap and resin so it wipes off without leaving residue.
Labels and grease removed
Cold Degreaser cleans oily metal and plastic parts and lifts sticker glue.
Workshop sizes
Universal Oil and Resin Remover both come in 5 litres for the wash bay and workshop.
Application
-
Resin Remover
With the saw switched off and the plug lead or battery removed, spray the chain and bar, let it soak a few minutes, brush and wipe clean. Wear gloves, and re-oil the chain before it goes out.
-
Ballistol Universal Oil
Wipe off dirt, spray a thin coat on bare metal and moving parts, work them and wipe off the excess, leaving a thin film before the tool goes back in stock.
-
Cold Degreaser 200ml
Spray greasy housings, plates and old label glue, and wipe clean.
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Clean and dry the slide rails, spray a thin, even coat from 15 to 20cm and leave it a few minutes to dry.
-
Silicone Oil Spray, 65ml
Wipe O-rings and seals on hose fittings clean, apply a thin coat and buff off the excess.
Areas
Returns bay
Tools coming back dirty, wet or seized.
Workshop
Chainsaws, saws, cutters and small plant being serviced.
Stores
Tools and spares waiting for the next hire.
Hire counter
Kit being labelled and prepared for collection.
Uses
- Cleaning and protecting tools between hires
- Cleaning resin and sap off hire chainsaws and saw blades
- Freeing seized adjusters, clamps and threads
- Removing grease and old hire labels before tools go back out
- Lubricating slide rails on tile cutters and saw benches
- Protecting stock in the stores through quiet months
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.







