Ballistol for Oil & Gas Sites

Oil and gas sites, onshore and offshore, deal with salt air, weather and a lot of exposed steel. Universal Oil displaces water, frees seized valve spindles and fixings, and leaves a film that protects metal against corrosion. PTFE Spray suits doors and hatches, Silicone Oil looks after rubber seals, and Cold Degreaser cleans oily equipment before inspection.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Protection against salt air

Universal Oil displaces water and protects metal against rust and corrosion.

Seized valves freed

Its low surface tension lets it creep into fine gaps in threads.

Dry film for hatches

PTFE Spray lubricates without a wet film that collects grit.

Data sheets for approval

Safety data sheets are in our technical data library.

Application

  • Ballistol Universal Oil

    Wipe off dirt and salt, spray the spindle or thread and work it. Leave seized parts at least 15 minutes, or overnight, then wipe off the excess. Follow site rules on aerosols.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the hinge or winch cable, shake the can and spray a thin coat from 15 to 20cm. Let it dry before use.

  • Silicone Oil Spray, 65ml

    Wipe the seal clean, apply a thin coat with a cloth and buff off the excess. Keep it off decks, steps and walkways.

  • Cold Degreaser 200ml

    Spray an even coat over the oily equipment and wipe clean before inspection or painting.

Areas

Wellsites and pads

Valves, gates, padlocks and exposed fittings.

Offshore and coastal

Steelwork, doors and hatches in salt air.

Terminals

Pumps, valves and pipework fittings.

Stores and workshops

Tools and spares waiting for a campaign.

Uses

  • Freeing seized valve spindles, handwheels and fixings
  • Protecting exposed steel fittings and tools from salt air
  • Lubricating doors, hatches and cable winches with dry PTFE
  • Keeping rubber seals on doors and hatches supple
  • Degreasing equipment before inspection or painting
  • Supplying maintenance stores at terminals and depots

Ordering in volume

Operators and contractors usually buy through a supplier approval process and ask for safety data sheets first, which are in our technical data library. Orders tend to follow planned maintenance campaigns and shutdowns.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.