Ballistol for Sheet Metal Works
Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.
Products for large orders
-
Ballistol Universal Oil
From £4.50 retail
-
Cold Degreaser 200ml
£7.45 retail
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
£6.75 retail
-
Silicone Oil Spray, 65ml
£5.10 retail
Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.
Benefits
Thin steel protected
A light film of Universal Oil keeps damp off blanks and formed parts in a cold unit.
Paint-ready parts
Cold Degreaser lifts oil, grease and label glue before painting.
Gauges that slide
PTFE Spray leaves a dry film on guides and slides that does not collect dust.
Supple gaskets
Silicone Oil keeps rubber gaskets on finished enclosures from drying out.
Application
-
Ballistol Universal Oil
Wipe the sheet or part clean, spray a thin coat and leave it a few minutes. Wipe off the excess with a dry cloth so only a light film is left.
-
Cold Degreaser 200ml
Spray an even coat onto the oily face or label glue and wipe it off before painting.
-
PTFE (Teflon™) Spray 200ml - Dry Lubricant
Clean off old grease and let the guide dry. Shake the can, spray a thin coat from 15 to 20cm and leave it a few minutes before use.
-
Silicone Oil Spray, 65ml
Wipe the gasket clean, apply a thin coat with a cloth and buff off the excess.
Areas
Cutting and punching
Guillotines, punches and the blanks that come off them.
Folding and forming
Folder beds, back gauges and formed parts.
Paint prep
Parts that need oil, grease and glue removing before paint.
Assembly
Enclosures and cabinets with hinges, latches and rubber gaskets.
Uses
- Protecting blanks and formed parts from rust between operations
- Wiping down guillotine and folder beds before the unit closes
- Degreasing parts before painting
- Lubricating back gauge guides and slides with dry PTFE
- Removing label glue and film residue from sheet
- Keeping rubber gaskets supple on enclosures before they ship
Ordering in volume
- Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
- Mix products and sizes in one order. Tell us if you need something that is not listed here.
- If you reorder regularly, tell us how often and we will plan stock around you.
- Technical and safety data sheets for every product are on our technical data page.
- We confirm price and delivery before anything is sent, then invoice you.
Want to sell Ballistol in your shop instead? See trade and wholesale accounts.





