Ballistol for Biogas & Anaerobic Digestion Plants

Anaerobic digestion sites are damp and corrosive, and steel around feed halls, tanks and pumps rusts quickly. Universal Oil frees seized valves and hatch fixings and leaves a film that protects bare steel. PTFE Spray suits roller shutters on the feed hall, Silicone Oil keeps rubber seals on inspection hatches supple, and Cold Degreaser cleans oily equipment before inspection.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Seized fittings freed

Universal Oil creeps into fine gaps in rusted threads.

Steel protected in damp air

A thin film keeps moisture off bare steel.

Shutters that keep running

PTFE Spray leaves a dry film that does not pick up dust and grit.

Seals looked after

Silicone Oil keeps rubber hatch seals from drying out and cracking.

Application

  • Ballistol Universal Oil

    Give seized threads two or three short bursts and leave them at least 15 minutes, or overnight. Follow your site rules on aerosols, then wipe off the excess.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old grease, let the runner dry and spray a thin coat from 15 to 20cm. Leave it a few minutes before use.

  • Silicone Oil Spray, 65ml

    Wipe the hatch seal clean, apply a thin coat with a cloth and buff off the excess.

  • Cold Degreaser 200ml

    Spray an even coat over oily surfaces and wipe clean before inspection or painting.

Areas

Feed hall

Roller shutters, hoppers and feed equipment.

Tanks and digesters

Valves, hatch fixings and inspection seals.

Pump rooms

Pumps, valves and pipework fittings.

Workshop

Tools and spares.

Uses

  • Freeing seized valves, hatch fixings and padlocks
  • Protecting bare steel around tanks, pumps and feed equipment
  • Lubricating feed hall roller shutters with dry PTFE
  • Keeping rubber seals on inspection hatches supple
  • Degreasing pumps and equipment before inspection
  • Protecting tools and spares in the workshop

Ordering in volume

AD operators usually buy for the site workshop on a regular cycle, and groups with several plants often order for all of them together. Safety data sheets for your site assessment are in our technical data library.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.