Ballistol for Canneries

Canning lines fill, seam, label and pack at speed, and the fillers and seamers sit right next to open product. Ballistol H1 Food Oil is NSF H1 registered for kit where incidental food contact is possible, will not taint product and protects steel against rust through washdowns. Universal Oil and Cold Degreaser are for the workshop, away from food.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Next to open product

H1 Food Oil is NSF H1 registered for lubricants used where incidental food contact is possible.

Repels water

It stands up to washdown and protects steel against rust and oxidation.

Less wear

It lubricates moving parts under heavy load and reduces wear.

Workshop clean-up

Cold Degreaser puts down an even coat and reaches places a brush cannot.

Application

  • Ballistol H1 Food Oil

    After washdown, apply sparingly to filler and seamer moving parts and wipe off the excess.

  • Conveyors and labellers

    Use a small amount of H1 Food Oil on conveyor guides, bearings and labeller moving parts, then wipe back.

  • Ballistol Universal Oil

    For seized fasteners on plant away from food, leave it at least 15 minutes, or overnight, before working them free. It is not for food contact.

  • Cold Degreaser 200ml

    Spray an even coat onto oily workshop parts and wipe clean before refitting.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    For warehouse doors and shutters, spray a thin coat from 15 to 20cm onto the clean, dry runner and let it dry.

Areas

Filling and seaming

Fillers and seamers.

Conveyors

Guides, rails and bearings.

Labelling and packing

Labellers and case packers.

Workshop and warehouse

Fasteners, parts cleaning, doors and shutters, away from food.

Uses

  • Lubricating filler and seamer moving parts
  • Keeping can conveyors, guides and rails running
  • Lubricating labellers and case packers
  • Protecting steel from rust after washdown
  • Freeing seized fasteners on plant away from food
  • Degreasing parts on the workshop bench

Ordering in volume

Canneries often plan their H1 Food Oil for the season and repeat the order as stock runs down. Tell us how many lines you run and we can quote.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.