Ballistol for Alarm & CCTV Installers

Alarm and CCTV installers work up ladders and outdoors, where camera lenses get grimy and fixings, hinges and locks rust. Optics Cleaner cleans camera lenses without leaving water marks, Universal Oil protects tools and frees seized fixings, and PTFE Spray suits gate hinges and locks on access jobs. Silicone Oil looks after rubber seals on outdoor housings.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Clearer pictures

Optics Cleaner lifts dust, smears and grime from camera lenses.

No residue

It is alcohol-based and evaporates fully, so it leaves no water marks.

Old fixings freed

Universal Oil creeps into rusted threads on brackets and bell boxes.

Gates that move

PTFE Spray lubricates gate hinges and tracks without a wet film that holds grit.

Application

  • Optics & Lens Cleaner Spray, 30ml

    Brush off loose grit first, then spray one or two pumps onto a microfibre cloth, never onto the lens. Wipe from the centre outwards and polish dry.

  • Ballistol Universal Oil

    Give the fixing two or three short bursts and leave it at least 15 minutes, or overnight. Keep it to fixings and tools, never live parts.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old grease, let the hinge or track dry, shake the can and spray a thin coat from 15 to 20cm. Leave it a few minutes before use.

  • Silicone Oil Spray, 65ml

    Wipe the seal clean, apply a thin coat with a cloth and buff off the excess.

Areas

Camera positions

Lens fronts and housings that collect grime outdoors.

Bell boxes and brackets

Fixings that rust and seize on external walls.

Gates and access control

Hinges, tracks and locks on access jobs.

Vans

Drill bits, hand tools and fixings.

Uses

  • Cleaning grime and smears off camera lenses on service visits
  • Freeing seized fixings on old bell boxes and brackets
  • Lubricating gate hinges, sliding gates and locks with dry PTFE
  • Keeping rubber seals on outdoor housings supple
  • Protecting drill bits and hand tools from rust in the van
  • Removing old labels and sticker glue from panel covers

Ordering in volume

Installers usually stock each van with the same small kit and reorder for the fleet together. Firms with maintenance contracts tend to reorder on a steady cycle that follows their service visits.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.