Ballistol for Soft Drinks & Bottling Plants

High-speed filling lines run long shifts, and any lubricant on a filler, capper or conveyor has to be one that can be used near the product. Ballistol H1 Food Oil is NSF H1 registered, will not taint drinks and is non-staining. Maintenance teams also use Universal Oil, PTFE Spray and Cold Degreaser on plant away from product.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Fit for the filler

H1 Food Oil is NSF H1 registered for lubricants used where incidental food contact is possible.

Takes the load

It lubricates moving parts under heavy load and reduces wear.

Washdown and rust

It repels water and leaves a strong film against rust and oxidation.

Fewer products in stores

H1 for the line, Universal Oil for the workshop and PTFE Spray for doors and runners.

Application

  • Ballistol H1 Food Oil

    Apply sparingly to filler, capper and labeller moving parts and wipe off the excess before the line restarts.

  • Conveyors and drives

    Use H1 Food Oil on conveyor chains, bearings and gears near the product. Low evaporation means it lasts between applications.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    On warehouse doors and racking runners, clean off old lubricant, spray a thin, even coat from 15 to 20cm and leave it a few minutes to dry. Keep it off surfaces that touch drinks.

  • Ballistol Universal Oil

    In the workshop, leave it at least 15 minutes on rusted threads, or overnight, then wipe off. It is not for food contact.

  • Cold Degreaser 200ml

    Spray oily parts on the bench and wipe clean before refitting.

Areas

Filling hall

Fillers, cappers and labellers.

Conveyors

Chains, bearings, guides and gearboxes.

Warehouse

Doors, shutters and racking runners.

Engineering workshop

Seized fasteners, parts cleaning and tool care, away from product.

Uses

  • Lubricating filler, capper and labeller moving parts
  • Keeping conveyor chains, bearings and guide rails running
  • Lubricating pumps and gearboxes where product contact is possible
  • Protecting steel from rust after washdown
  • Lubricating doors, shutters and racking runners in the warehouse
  • Freeing seized fasteners and degreasing parts in the engineering workshop

Ordering in volume

Bottling plants usually raise a purchase order from engineering stores and repeat it on a set cycle. Tell us how many lines and shifts you run and we will quote for the quantity.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.