Ballistol for Safe Engineers

Safe engineers service heavy bolt work, hinges and key locks that may not have moved in years. Cold Degreaser strips dried, gummed oil out of the mechanism first. Universal Oil creeps into stiff hinges and bolt work and does not resinify, and PTFE Spray leaves a dry film in key locks and near electronic locks, where its film is non-conductive.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Old oil cleared

Cold Degreaser removes dried, resinified oil from bolt work and parts.

Will not gum up

Universal Oil does not resinify, so it stays thin in hinges and bolt work.

Dry film for key locks

PTFE Spray lubricates the keyway without leaving oil to collect dust.

Near electronics

PTFE Spray's dry film is non-conductive, which suits mechanisms near electronic locks.

Application

  • Cold Degreaser 200ml

    Spray the bolt work and lock parts, let it dissolve the old oil and grime, then wipe clean and let it dry.

  • Ballistol Universal Oil

    Apply a thin coat to hinges and bolt work, work the handle a few times and wipe off the excess. Inside the safe, leave a light film on bare steel.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Follow the lock maker's guidance. Give the keyway a short burst, work the key and leave it a few minutes to dry.

Areas

Safe doors

Hinges, bolt work and handles.

Key locks

Keyways and lock bodies.

Interiors

Bare steel in damp rooms and basements.

Van

Drill bits, tools and spare parts.

Uses

  • Stripping old, gummed oil out of bolt work
  • Lubricating hinges and bolt work on safe doors
  • Lubricating key lock keyways with a dry film
  • Protecting bare steel inside safes kept in damp rooms
  • Protecting drill bits and tools in the van

Ordering in volume

Safe engineering firms usually order for the workshop and each engineer's van together, then reorder as annual service visits come round.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.