Ballistol for Abattoirs

Abattoirs have heavy steel kit, wet floors and long days. Overhead rails, hoists and saws all need lubricating close to carcasses, which calls for a lubricant made for incidental food contact. Ballistol H1 Food Oil is NSF H1 registered, repels water and protects steel against rust. Universal Oil covers lairage gates and the workshop, away from meat.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Close to the carcass

H1 Food Oil is NSF H1 registered for lubricants used where incidental food contact is possible.

Wet days, less rust

It repels water and moisture and protects steel against rust and oxidation.

Heavy loads

It lubricates moving parts under heavy load and has anti-seize properties.

Gates that open

Universal Oil frees stiff lairage gates and padlocks, away from meat, and leaves a film that keeps damp off.

Application

  • Ballistol H1 Food Oil

    After washdown, apply sparingly to rail rollers, trolley wheels and hoist chains, then wipe off the excess.

  • Saws

    Put a small amount of H1 Food Oil on the moving parts of carcass and splitting saws after cleaning and wipe back the excess.

  • Ballistol Universal Oil

    For lairage gates, pen fittings, padlocks and workshop tools only, away from meat. Work the part, leave it 2 to 5 minutes and wipe off the excess. It is not for food contact.

  • Silicone Oil Spray, 65ml

    Wipe chiller door seals clean, apply a thin coat with a cloth and buff off. Keep it off floors, which it makes slippery.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry sticking chiller door runners, then spray a thin coat from 15 to 20cm and let it dry.

Areas

Slaughter line

Overhead rails, trolleys, hoists and saws.

Chillers

Door runners and seals.

Lairage

Gates, pens and padlocks, away from meat.

Workshop

Tools and plant away from food areas.

Uses

  • Lubricating overhead rail rollers and trolleys
  • Lubricating the moving parts of carcass and splitting saws
  • Keeping hoists, winches and chains moving
  • Protecting steel fittings from rust after washdown
  • Freeing lairage gates, pens and padlocks, away from meat
  • Maintaining workshop tools and plant away from food areas

Ordering in volume

Abattoirs usually buy H1 Food Oil for the line and Universal Oil for the lairage and workshop in the same order. Multi-site operators often order centrally.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.