Ballistol for Armed Forces Armourers

Armourers keep weapons serviceable through heavy use, long storage and every climate. Ballistol was developed in 1904 for military use and is Military Proven, as used by military around the world. Universal Oil cleans, lubricates and protects in one step, Gunex holds its protection in all climates, Robla Solo Mil dissolves copper and lead fouling, and GunCer greases high-load parts.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Military Proven

Developed in 1904 for military use, and as used by military around the world.

One step at the bench

Universal Oil cleans, lubricates and protects, so fewer products are needed.

Holds in all climates

Gunex protection holds in all climate zones, including the tropics.

Wide temperature range

GunCer Ceramic Grease works from -50°C to +150°C.

Application

  • Ballistol Universal Oil

    Wipe off loose dirt, apply a thin coat, work the action a few times and leave it 2 to 5 minutes. Wipe off the excess, leaving a thin film.

  • Robla Solo Mil

    For heavy fouling, plug one end of the barrel, fill it and leave it a couple of hours or overnight, then drain. Push dry felts through and oil the bore.

  • Guncer Ceramic Grease

    Clean the parts thoroughly, then apply sparingly and spread it with the dosing tip or a small brush.

  • Gunex Gun Oil

    Spread a few drops over the metal for lubrication that lasts between cleans.

  • Cleaning Brushes

    Use a bronze brush with a bore cleaner for carbon and copper build-up, then a bristle brush to spread oil.

Areas

Armoury

Weapons in racks and long-term storage.

Cleaning bench

Bores, bolts and actions during routine servicing.

Overseas and in the field

Weapons used in heat, cold, wet and salty air.

Personal cleaning kit

Pull-throughs and felts carried by users.

Uses

  • Cleaning, oiling and protecting weapons in one step
  • Removing copper, tombac and lead fouling from bores
  • Greasing locking lugs, guide rails and high-load parts
  • Protecting weapons in storage in any climate
  • Cleaning bores with calibre-sized felts and brushes
  • Pull-through cleaning away from the bench

Ordering in volume

Armouries usually buy through a set procurement process, so tell us what yours needs, such as data sheets or a formal quote.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.