Ballistol for Automotive Component Makers

Component makers machine, press and assemble parts in volume, and the maintenance team keeps lines, fixtures and tooling running between planned services. Universal Oil protects tooling and work in progress from rust, PTFE Spray lubricates slides and guides without a wet film, and Cold Degreaser cleans parts before painting or assembly. Keep Universal Oil away from brake components.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Fewer cans on the line

Universal Oil cleans, lubricates and protects, so one product covers many small jobs.

Dry lubrication on fixtures

PTFE Spray suits slides and guides where oil would collect dust.

Clean parts before paint

Cold Degreaser removes oil, grease and diesel deposits.

Seals that stay supple

Silicone Oil keeps rubber seals from drying out, cracking or sticking.

Application

  • Ballistol Universal Oil

    Wipe off swarf and dirt, spray a thin coat and wipe off the excess, leaving a light film. Keep it off brake parts and tyres.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the slide or guide, shake the can and spray a thin coat from 15 to 20cm. Leave it a few minutes before running.

  • Cold Degreaser 200ml

    Spray an even coat over the oily part and wipe it clean before painting or assembly.

  • Silicone Oil Spray, 65ml

    Wipe the seal clean, apply a thin coat with a cloth and buff off the excess. Keep it off brake parts and floors.

Areas

Press and machining

Press tools, fixtures and work in progress.

Assembly lines

Slides, guides, clamps and rubber seals.

Paint prep

Parts that need degreasing before coating.

Logistics

Stillages, racking, roller shutters and returnable packaging.

Uses

  • Protecting tooling and work in progress from rust between operations
  • Lubricating line slides, guides and fixtures with dry PTFE
  • Degreasing parts before painting or assembly
  • Freeing seized fixings on fixtures and press tools
  • Keeping rubber seals and grommets supple
  • Removing label glue from parts and returnable stillages

Ordering in volume

Component makers usually buy for the maintenance stores on a fixed reorder cycle, with extra ahead of summer and Christmas shutdowns. Purchasing teams can find safety data sheets in our technical data library.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.