Ballistol for Training Ranges

Training ranges are hard on weapons, target systems and steelwork, often in exposed places. Universal Oil cleans and protects issue weapons between details and keeps exposed steel from rusting. PTFE Spray suits target carriers and turning mechanisms because the dry film does not hold grit, Robla Solo Mil clears copper fouling, and Cold Degreaser cleans soot and grease before maintenance.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Grit stays off

PTFE Spray leaves a dry film on target mechanisms that does not pick up dust.

Exposed steel protected

Universal Oil leaves a film that water beads off.

Weapons ready for the next detail

Universal Oil cleans and protects in one step.

Clean before servicing

Cold Degreaser removes soot, grease and oil.

Application

  • Ballistol Universal Oil

    Wipe weapons over between details and leave a thin film. On range fittings, give stiff padlocks two or three short bursts and work them.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old lubricant, let the carrier dry and spray a thin even coat. Reapply when it starts to stick.

  • Robla Solo Mil

    Plug one end of the barrel, fill it with Robla Solo Mil and leave it a couple of hours or overnight before draining.

  • Cold Degreaser 200ml

    Spray sooty or greasy parts and wipe clean before servicing or painting.

  • Flexclean Bore Cleaning Rope

    With the weapon unloaded, pull the rope through in the direction of fire after the last shot, while the barrel is warm but not hot.

Areas

Armoury

Issue weapons and cleaning kit.

Firing point

Weapons cleaned between details.

Target systems

Carriers, turning mechanisms and frames.

Range estate

Gates, padlocks, doors and steelwork.

Uses

  • Cleaning issue weapons between details
  • Lubricating target carriers and turning targets with dry PTFE
  • Protecting steel targets, frames and range doors from rust
  • Clearing copper fouling from range weapons
  • Freeing seized padlocks and gate hinges on the range

Ordering in volume

Ranges usually order once or twice a year, splitting the order between armoury stock and range maintenance products.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.