Ballistol for Facilities Management Companies

FM companies run planned maintenance rounds and reactive call-outs across offices, schools, retail units and depots. Engineers need a short list of products that covers most small jobs on any site. PTFE Spray keeps doors, shutters and runners moving, Universal Oil frees stiff locks and protects tools, and H1 Food Oil covers client kitchens and canteens.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

One kit across every contract

The same five products cover most small door, lock, seal and runner jobs, whichever client site the engineer is on.

Dry film on busy doors

PTFE Spray leaves a dry layer on runners and shutters, so it does not collect dust in corridors and loading bays.

Covered for client kitchens

H1 Food Oil is NSF H1 registered for equipment where incidental food contact is possible.

Locks that stay free

Universal Oil does not resinify, so serviced locks and hinges do not gum up between visits.

Application

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean off dirt and old lubricant and let it dry. Shake the can, spray a thin, even coat on runners, tracks and hinges from 15 to 20cm, and leave it a few minutes before use.

  • Ballistol Universal Oil

    Give a stiff lock or hinge two or three short bursts, work it a few times and leave it 2 to 5 minutes to creep in. Wipe off the excess with a dry cloth.

  • Silicone Oil Spray, 65ml

    Wipe the seal clean, apply a thin coat with a cloth and buff off the excess. Keep it off floors and steps, which it makes slippery.

  • Cold Degreaser 200ml

    Spray onto sticker glue, grease or grime on glass, metal and plastic and wipe off.

  • Ballistol H1 Food Oil

    In client kitchens, apply sparingly to slicers, mixers and other moving parts and wipe off the excess.

Areas

Offices and common areas

Door locks, hinges, drawer runners and window fittings.

Loading bays and stores

Roller shutters, sliding doors and padlocks.

Client kitchens and canteens

Catering equipment where incidental food contact is possible.

Engineers' vans

Tools and spares carried between sites.

Uses

  • Freeing stiff locks, latches and hinges on planned maintenance rounds
  • Lubricating roller shutters, sliding doors and drawer runners with a dry film
  • Keeping rubber door and window seals supple
  • Removing sticker glue and grease from glass, metal and plastic
  • Lubricating catering equipment in client kitchens with H1 Food Oil
  • Giving every engineer's van the same small kit

Ordering in volume

FM firms usually want one standard kit per engineer's van, ordered centrally and topped up when a new contract starts. Tell us how many engineers or sites you cover and we will quote for that.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.