Ballistol for Paintball & Laser Tag Sites

Paintball and laser tag sites run hire kit hard and store it in sheds and containers between games. Silicone Oil keeps O-rings and seals on gas and CO2 markers supple, PTFE Spray suits moving parts on taggers because its dry film is non-conductive, and Universal Oil protects tools, padlocks and field gates. Optics Cleaner clears mask lenses between groups.

Supplied direct by Ballistol UK, the official UK distributor. Made to the same formula since 1904.

Products for large orders

Retail prices shown. Large orders are quoted at trade prices, and you can mix products and sizes in one order.

Benefits

Markers that hold gas

Silicone Oil keeps O-rings and seals supple, where mineral oil can make them swell.

Suits parts near electronics

PTFE Spray leaves a dry, non-conductive film.

Clear mask lenses

Optics Cleaner evaporates fully and is safe on plastic lenses.

Site kit protected

Universal Oil keeps rust off tools, padlocks and steel props in damp containers.

Application

  • Silicone Oil Spray, 65ml

    Apply sparingly to seals, O-rings and moving parts, and put a drop on the gas valve every few fills. Keep it out of the barrel.

  • PTFE (Teflon™) Spray 200ml - Dry Lubricant

    Clean and dry the moving part, shake the can and spray a thin coat from 15 to 20cm. Let it dry before the tagger is used.

  • Optics & Lens Cleaner Spray, 30ml

    Spray the cloth, never the lens, wipe from the centre outwards and polish dry. Follow the mask maker's advice for coated lenses.

  • Ballistol Universal Oil

    Give padlocks two or three short bursts and work them. Wipe tools and steel props with a thin coat and wipe off the excess.

Areas

Hire armoury

Markers, taggers, seals and O-rings.

Mask station

Mask lenses cleaned between groups.

Field

Gates, padlocks and steel props.

Containers and sheds

Tools and kit stored between games.

Uses

  • Keeping O-rings and seals on hire markers supple
  • Lubricating triggers and moving parts on laser taggers with dry PTFE
  • Cleaning mask lenses between groups
  • Freeing padlocks on containers and field gates
  • Protecting tools and steel props from rust

Ordering in volume

Sites usually order before the busy summer and school holiday period, splitting the stock between the hire armoury and site maintenance.
  • Tell us what you need, roughly how much and how often. We reply with a quote at trade prices.
  • Mix products and sizes in one order. Tell us if you need something that is not listed here.
  • If you reorder regularly, tell us how often and we will plan stock around you.
  • Technical and safety data sheets for every product are on our technical data page.
  • We confirm price and delivery before anything is sent, then invoice you.

Want to sell Ballistol in your shop instead? See trade and wholesale accounts.